IVAR BRA.F7.100 flanged ball check valve – DN 200, L = 500 mm
Code: F7100200Product detailed description
Application
The valve suits waste water, industrial and agricultural applications and thicker, viscous liquids. The datasheet does not cover steam or gases.
Features
- ductile iron body and cover with internal and external epoxy coating, NBR seal
- the removable cover lets you clean or replace the ball without taking the valve out of the pipeline
- full bore with low pressure loss, DN 200: Kv 1990 m³/h, minimum opening pressure 4.5 kPa
- every unit is tested to EN 12266 with leak rate A, a drinking-water approval is available
Installation and operation
The valve can be installed vertically (recommended) or horizontally. For DN 200 to 400 the maximum pressure is 10 bar and the temperature -10 to +70 °C. It is not intended for steam or gases. Installation should be carried out by a qualified contractor.
Technical data
| Code | F7100200 |
| Manufacturer | IVAR |
| Type | BRA.F7.100 |
| Nominal size | DN 200 |
| Face-to-face length | 500 mm |
| Max. pressure | 10 bar (water, DN 200–400) |
| Temperature range | -10 °C … +70 °C |
| Flanges | EN 1092 / ISO 7005 |
| Body material | ductile iron |
| Seal | NBR |
| Kv | 1990 m³/h |
| Min. opening pressure | 4.5 kPa |
| Weight | 88.4 kg |
| Installation | vertical (recommended) or horizontal |
Frequently asked questions
How do I clean the ball in the BRA.F7.100 valve?
The cover is removable, so the ball can be cleaned or replaced without taking the valve out of the pipeline. The system must be depressurised before any work.
In what position is the valve installed?
The vertical position is recommended; horizontal is also possible. Observe the flow direction when installing.
Is the valve suitable for steam or gases?
No, according to the datasheet it is not intended for steam or gases. It is meant for waste water and viscous liquids.
Additional parameters
| Category: | BRA.F7.100 - Flanged Check Valve (Ball) |
|---|---|
| Warranty: | 2 years |
| Weight: | 88.4 kg |
| Code: | F7100200 |
| Manufacturer: | IVAR |
| Type: | BRA.F7.100 |
| Nominal size: | DN 200 |
| Face-to-face length: | 500 mm |
| Max. pressure: | 10 bar (water, DN 200–400) |
| Temperature range: | -10 °C … +70 °C |
| Flanges: | EN 1092 / ISO 7005 |
| Body material: | ductile iron |
| Seal: | NBR |
| Kv: | 1990 m³/h |
| Min. opening pressure: | 4.5 kPa |
| Weight: | 88.4 kg |
| Installation: | vertical (recommended) or horizontal |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
