Flanged Soft-Seated Gate Valve IVAR BRA.20.900 – DN 300, L = 270 mm
Code: 20900300Product detailed description
20900300 is a soft-seated flanged gate valve of the BRA.20.900 series, size DN 300, face-to-face length 270 mm. It is used to shut off heating and water lines, in water treatment and distribution, in waste water and in industrial, fire-fighting and agricultural applications.
Features
- max. pressure PN 16, flanges to EN 1092 (ISO 7005), operating temperature -10 °C to +85 °C
- ductile iron body GJS 500-7, stainless steel AISI 420 stem, ductile iron wedge with EPDM coating, EPDM seals and O-ring
- wedge with a through opening to prevent water stagnation, full bore
- parts in contact with water are also suitable for drinking water (drinking-water approval)
- stem seal with 4 replaceable O-rings – replacement is possible with the valve open and the pipeline under pressure
- weight 119 kg, maximum torque 225 Nm for sizing the actuator
Installation and use
The gate valve is installed between the pipeline flanges or at the end of the line and is used only in the fully open or fully closed position. The flanges must not be welded to the pipe after installation, the bolts are tightened gradually in a cross pattern and the pipework must not load the valve with its own weight. From DN 200 the manufacturer recommends a dismantling joint. The optional ISO 5211 flange allows manual, electric or pneumatic actuators to be added. The valve is not suitable for steam or liquids containing oils or hydrocarbons.
Technical data
| Code | 20900300 |
| Manufacturer | IVAR |
| Type | BRA.20.900 |
| Kind | soft-seated flanged gate valve |
| Nominal size | DN 300 |
| Face-to-face length | 270 mm |
| Max. working pressure | PN 16 |
| Temperature range | -10 °C to +85 °C |
| Flanges | EN 1092 / ISO 7005 |
| Body material | ductile iron GJS 500-7 |
| Stem | AISI 420 stainless steel |
| Wedge and seals | EPDM-coated wedge, EPDM seals |
| Finish | epoxy RAL 5002 |
| Weight | 119 kg |
| Torque | 225 Nm |
Frequently asked questions
Is the gate valve suitable for drinking water?
Yes, according to the manufacturer all parts in contact with water are also suitable for drinking water, and the valve has a drinking-water approval. It is not intended for steam or liquids containing oils or hydrocarbons.
Can an actuator be added to the gate valve?
Yes, the optional ISO 5211 flange allows manual, electric or pneumatic actuators to be fitted. When selecting an actuator, start from the 225 Nm torque given for DN 300.
How is the DN 300 gate valve installed correctly?
It is placed with gaskets between the pipeline flanges, the bolts are tightened crosswise and the flanges must not be welded. From DN 200 a dismantling joint is recommended, and slings and safety hooks should be used when handling it.
Additional parameters
| Category: | BRA.20.900 - Gate Valve with Soft Seal |
|---|---|
| Warranty: | 2 years |
| Weight: | 119 kg |
| Code: | 20900300 |
| Manufacturer: | IVAR |
| Type: | BRA.20.900 |
| Kind: | soft-seated flanged gate valve |
| Nominal size: | DN 300 |
| Face-to-face length: | 270 mm |
| Max. working pressure: | PN 16 |
| Temperature range: | -10 °C to +85 °C |
| Flanges: | EN 1092 / ISO 7005 |
| Body material: | ductile iron GJS 500-7 |
| Stem: | AISI 420 stainless steel |
| Wedge and seals: | EPDM-coated wedge, EPDM seals |
| Finish: | epoxy RAL 5002 |
| Weight: | 119 kg |
| Torque: | 225 Nm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
