Flanged Y-strainer BRA.11.000 – DN 250, L = 730 mm, ductile iron
Code: 11000250Product detailed description
Protection for pumps and valves
The BRA.11.000 DN 250 strainer is installed upstream of circulating pumps, valves, check valves and pressure reducing valves to protect them from mechanical and ferrous dirt. It is intended for heating and air conditioning (HVAC), water distribution and treatment, agricultural applications and chemical, food and industrial plants. It can be installed horizontally or vertically.
Design
- body and cover of GJS 500-7 ductile iron, RAL 5002 epoxy coating
- filter screen of perforated AISI 304 stainless steel sheet
- EPDM cover gasket, A2-70 stainless steel bolts
- stainless steel plug and brass mini valve for draining dirt or venting
- Kv 844 m³/h, weight 99 kg
Every unit is tested to EN 12266 with leakage rate A and complies with Directive 2014/68/EU (PED).
Installation and maintenance
The strainer is unidirectional – it is fitted according to the arrow on the body between the mating flanges with gaskets, free of pipe stress; the flanges must not be welded and the bolts are tightened in a cross pattern. In new installations the manufacturer recommends cleaning the screen after the first week of operation. The DN 250 spare screen has code 100009CRI05F1C. The strainer is not suitable for steam, gas, oils, hydrocarbons or aggressive or abrasive liquids.
Technical data
| Code | 11000250 |
| Manufacturer | IVAR |
| Type | BRA.11.000 |
| Nominal size | DN 250 |
| Face-to-face length | 730 mm |
| Max. operating pressure | 16 bar (water) |
| Temperature range | -10 °C to +100 °C |
| Flanges | EN 1092 / ISO 7005 |
| Body material | GJS 500-7 ductile iron |
| Screen | AISI 304 stainless steel |
| Seal | EPDM |
| Coating | epoxy RAL 5002 |
| Kv | 844 m³/h |
| Weight | 99 kg |
| Spare screen | 100009CRI05F1C |
Frequently asked questions
Can the strainer be installed in a vertical pipe?
Yes, installation is possible horizontally and vertically. In a vertical pipe with upward flow, however, dirt can travel back upstream when the pumps are switched off.
How is the strainer cleaned?
With the system shut down and cooled, the stainless screen is removed through the detachable cover and cleaned; dirt can also be drained via the plug and mini valve. In new systems the manufacturer recommends the first cleaning after one week of operation.
Is DN 250 also available with a magnet?
According to the technical data sheet, the magnetic version BRA.11.000 M is only made up to DN 150. For DN 250 there is the strainer without magnet and the spare screen 100009CRI05F1C.
Additional parameters
| Category: | BRA.11.000, FV, M - Flanged Filters |
|---|---|
| Warranty: | 2 years |
| Weight: | 99 kg |
| Code: | 11000250 |
| Manufacturer: | IVAR |
| Type: | BRA.11.000 |
| Nominal size: | DN 250 |
| Face-to-face length: | 730 mm |
| Max. operating pressure: | 16 bar (water) |
| Temperature range: | -10 °C to +100 °C |
| Flanges: | EN 1092 / ISO 7005 |
| Body material: | GJS 500-7 ductile iron |
| Screen: | AISI 304 stainless steel |
| Seal: | EPDM |
| Coating: | epoxy RAL 5002 |
| Kv: | 844 m³/h |
| Weight: | 99 kg |
| Spare screen: | 100009CRI05F1C |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
