Flanged Y-strainer BRA.11.000 DN 300, PN 16, L = 850 mm
Code: 11000300Product detailed description
Flanged strainer for protecting pumps and valves
The BRA.11.000 DN 300 (code 11000300) is a flanged Y-strainer with a cast-iron body and an epoxy coating. It catches rust, welding scale and other solid mechanical or ferrous impurities, and so protects circulating pumps, valves, check valves and pressure-reducing valves. The manufacturer lists it for heating, air conditioning (HVAC), water treatment and distribution, agricultural applications and industrial plants.
Technical features
- nominal size DN 300, face-to-face length 850 mm, weight 135.5 kg
- PN 16 flanges to EN 1092; for DN 250–350 the manufacturer states a maximum pressure of 10 bar
- operating temperature −10 °C to +100 °C; also usable for water containing up to 50 % glycol
- body and cover in cast iron with RAL 5002 epoxy coating
- filter screen in perforated AISI 304 stainless-steel sheet, cover seal in EPDM
- mini valve (brass) for complete draining or venting in both installation positions
- removable cover for inspecting and cleaning the screen
- Kv value 1,110 m³/h; horizontal or vertical installation
Notes
The strainer is not suitable for steam, gases or liquids containing oils and hydrocarbons; the manufacturer also advises against hazardous, corrosive and abrasive liquids. The product is made in accordance with Directive 2014/68/EU (PED), and every unit is tested to EN 12266 (leakage rate A).
Technical data
| Code | 11000300 |
| Manufacturer | IVAR |
| Type | BRA.11.000 (Y-strainer) |
| Nominal size | DN 300 |
| Face-to-face length | 850 mm |
| Flanges | PN 16, EN 1092 / ISO 7005 |
| Max. pressure (DN 250–350) | 10 bar |
| Temperature | -10 to +100 °C |
| Body and cover material | cast iron with RAL 5002 epoxy coating |
| Filter screen | stainless steel AISI 304, perforated sheet |
| Seal | EPDM |
| Kv value | 1,110 m³/h |
| Weight | 135.5 kg |
| Spare screen (DN 300) | 120009CRI05F1C |
Frequently asked questions
In which position is the strainer installed?
The data sheet allows both horizontal and vertical installation. The mini valve for draining or venting works in both positions.
Can the screen be taken out, cleaned or replaced?
Yes, the strainer has a removable cover for inspection and maintenance. The spare screen for DN 300 is listed by the manufacturer as a separate item under code 120009CRI05F1C.
Which media is the strainer not suitable for?
It is not suitable for steam, gases or liquids containing oils and hydrocarbons. For water with glycol the manufacturer states a content of up to 50 %.
Additional parameters
| Category: | BRA.11.000, FV, M - Flanged Filters |
|---|---|
| Warranty: | 2 years |
| Weight: | 135.5 kg |
| Code: | 11000300 |
| Manufacturer: | IVAR |
| Type: | BRA.11.000 (Y-strainer) |
| Nominal size: | DN 300 |
| Face-to-face length: | 850 mm |
| Flanges: | PN 16, EN 1092 / ISO 7005 |
| Max. pressure (DN 250–350): | 10 bar |
| Temperature: | -10 to +100 °C |
| Body and cover material: | cast iron with RAL 5002 epoxy coating |
| Filter screen: | stainless steel AISI 304, perforated sheet |
| Seal: | EPDM |
| Kv value: | 1,110 m³/h |
| Weight: | 135.5 kg |
| Spare screen (DN 300): | 120009CRI05F1C |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
