IVAR BRA.F8.520 flanged rubber expansion joint – DN 150, L = 156 mm
Code: F8520150Product detailed description
Application
The expansion joint absorbs pipe extension and compression, axial misalignment and angular deflection, reduces the transmission of vibration and noise and softens water hammer. It is used in waterworks, industry, agriculture and compressed-air networks.
Features
- EPDM elastic element, nylon fabric reinforcement and steel-wire retaining ring, rotating flanges made of AISI 316 stainless steel
- PN 16, fits between PN 10 and PN 16 flanges (EN 1092 / ISO 7005), temperature -10 to +100 °C
- DN 150 absorbs 16 mm compression, 10 mm extension, 12 mm lateral offset and 15° angular offset
- DN 150: weight 11.6 kg, Kv 4261 m³/h
Installation and operation
When installing, rotate the compensator flanges until they line up with all the holes of the counter-flange, and keep it out of direct sunlight. The expansion joint is not suitable for steam or vacuum. Installation should be carried out by a qualified contractor.
Technical data
| Code | F8520150 |
| Manufacturer | IVAR |
| Type | BRA.F8.520 |
| Nominal size | DN 150 |
| Face-to-face length | 156 mm |
| Max. pressure | PN 16 |
| Temperature range | -10 °C … +100 °C |
| Flanges | EN 1092 / ISO 7005, PN 10/16 |
| Elastic element | EPDM |
| Flange material | stainless steel AISI 316 |
| Compression | 16 mm |
| Extension | 10 mm |
| Lateral offset | 12 mm |
| Angular offset | 15° |
| Kv | 4261 m³/h |
| Weight | 11.6 kg |
Frequently asked questions
What does the BRA.F8.520 expansion joint compensate for?
Pipe extension and compression, axial misalignment and angular deflection. For DN 150 that means 16 mm compression, 10 mm extension, 12 mm lateral offset and 15° angle.
Can the movement be limited or vibration damped further?
Yes. The datasheet lists BRA.F8.KIT limit rods to restrict extension and compression and BRA.W8.500 anti-vibration spacers to reduce noise and vibration further. Both are ordered separately.
Is the expansion joint suitable for steam or vacuum?
No, the product is suitable for neither steam nor vacuum. The operating temperature is -10 to +100 °C and the pressure class is PN 16.
Additional parameters
| Category: | BRA.F8.520 - rubber expansion joint - stainless steel |
|---|---|
| Warranty: | 2 years |
| Weight: | 11.6 kg |
| Code: | F8520150 |
| Manufacturer: | IVAR |
| Type: | BRA.F8.520 |
| Nominal size: | DN 150 |
| Face-to-face length: | 156 mm |
| Max. pressure: | PN 16 |
| Temperature range: | -10 °C … +100 °C |
| Flanges: | EN 1092 / ISO 7005, PN 10/16 |
| Elastic element: | EPDM |
| Flange material: | stainless steel AISI 316 |
| Compression: | 16 mm |
| Extension: | 10 mm |
| Lateral offset: | 12 mm |
| Angular offset: | 15° |
| Kv: | 4261 m³/h |
| Weight: | 11.6 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
