IVAR BRA.F5.000 flanged spring check valve – DN 250, L = 370 mm
Code: F5000250Product detailed description
Application
The valve is used in heating plants, air-conditioning systems, district heating, water distribution and treatment, industry, agriculture, compressed-air networks, fire-fighting systems and for oils and hydrocarbons. The datasheet does not cover steam or hazardous gases.
Features
- EN GJL 250 grey cast iron body, AISI 304 stainless steel spring, NBR seal
- flanges to EN 1092 / ISO 7005, max. pressure for water 16 bar, temperature with NBR -10 to +100 °C
- body and disc shape limit turbulence and pressure loss, DN 250: Kv 1620 m³/h, weight 81.4 kg
- for DN 250 the max. pressure with non-hazardous gases is 14 bar
Installation and operation
The spring allows vertical or horizontal installation, and the valve can also serve as a foot valve. It is not suitable for steam and must not be used in the liquid–vapour saturation region. Installation should be carried out by a qualified contractor.
Technical data
| Code | F5000250 |
| Manufacturer | IVAR |
| Type | BRA.F5.000 |
| Nominal size | DN 250 |
| Face-to-face length | 370 mm |
| Max. pressure | 16 bar (water) |
| Temperature range | -10 °C … +100 °C (NBR) |
| Flanges | EN 1092 / ISO 7005 |
| Body material | grey cast iron |
| Seal | NBR |
| Kv | 1620 m³/h |
| Weight | 81.4 kg |
| Installation | horizontal or vertical |
Frequently asked questions
In what position can the BRA.F5.000 valve be installed?
Both horizontally and vertically, because the stainless steel spring ensures closing. It can also be used as a foot valve.
Is the valve suitable for steam too?
No, the BRA.F5.000 series is not suitable for steam. It must not be used when temperature and pressure fall within the liquid–vapour saturation region.
Is the valve suitable for drinking water?
The datasheet lists a drinking-water approval. For water the maximum pressure is 16 bar.
Additional parameters
| Category: | BRA.F5.000 - Flanged Check Valve |
|---|---|
| Warranty: | 2 years |
| Weight: | 81.4 kg |
| Code: | F5000250 |
| Manufacturer: | IVAR |
| Type: | BRA.F5.000 |
| Nominal size: | DN 250 |
| Face-to-face length: | 370 mm |
| Max. pressure: | 16 bar (water) |
| Temperature range: | -10 °C … +100 °C (NBR) |
| Flanges: | EN 1092 / ISO 7005 |
| Body material: | grey cast iron |
| Seal: | NBR |
| Kv: | 1620 m³/h |
| Weight: | 81.4 kg |
| Installation: | horizontal or vertical |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
