DAB PULSAR 50/80 T-NA 5" submersible pump for boreholes and wells – 1.3 kW, 3x230 V
Code: 60210515Related products
Product detailed description
The DAB PULSAR 50/80 T-NA is a 5" multistage submersible pump with a stainless steel body, designed for boreholes and wells. This version has a three-phase 3x230 V motor with a rated output of 1.3 kW and is supplied without a float (NA). With the outlet closed it reaches a head of 75 m, about 50 m at 4.8 m³/h and 20 m at 7.2 m³/h.
What it is used for
- supplying a house with water from a well or borehole and boosting pressure
- pumping and transferring water
- garden irrigation and domestic gardening
Construction
The outer jacket, stator housing and filter cover are made of AISI 304 stainless steel, while the impellers, diffusers and suction filter are technopolymer. The hydraulic section sits below the motor; the motor, designed for continuous duty, is cooled by the pumped water. A double mechanical seal with an oil chamber in between (carbon/ceramic on the motor side, silicon carbide on the pump side) keeps the motor watertight and copes even with brief dry running. The rotor runs in robust ball bearings and the shaft is AISI 303 stainless steel.
Installation and electrical connection
The pump can be installed permanently or used as a portable unit, vertically or horizontally, down to an immersion depth of 20 m. It comes as standard with a 15 m H07RN-F cable. A maximum of 20 starts per hour is permitted. Protection of the three-phase motor must be provided by the user in the electrical installation; have the connection made by an electrician.
Technical data
| Code | 60210515 |
| Manufacturer | DAB |
| Type | DAB.PULSAR |
| Product type | 5" multistage submersible pump for boreholes and wells |
| Version | NA – without float |
| Power supply | 3x 230 V, 50 Hz |
| Rated power P2 | 1.3 kW (1.7 HP) |
| Rated current | 5.9 A |
| Max. head | 75 m |
| Head at 4.8 m³/h | 50 m |
| Delivery port | 1 1/4" |
| Diameter × length | 138 × 657 mm |
| Max. immersion depth | 20 m |
| Power cable | 15 m H07RN-F |
| Protection / insulation class | IP68 / F |
Frequently asked questions
What does NA in the pump name mean?
NA stands for the version without a float. Only the single-phase versions marked A have a float for automatic operation.
What water can the pump handle?
Clean water without solid or abrasive substances at 0 to +40 °C. The sand content must not exceed 50 g/m³.
How deep can the pump be submerged?
To a maximum of 20 m. The pump has a diameter of 138 mm and comes with a 15 m power cable as standard.
Does the three-phase version need motor protection?
Yes, for the three-phase version the user must provide motor protection in the electrical installation. The connection should be made by an electrician.
Additional parameters
| Category: | DAB.PULSAR(FM) - submersible 5" pumps for boreholes and wells |
|---|---|
| Warranty: | 24 |
| Voltage: | 400 V |
| Pump diameter (borehole): | 5" |
| Type: | pump |
| Delivery head (total head): | 61 – 100 m |
| Code: | 60210515 |
| Manufacturer: | DAB |
| Type: | DAB.PULSAR |
| Product type: | 5" multistage submersible pump for boreholes and wells |
| Version: | NA – without float |
| Power supply: | 3x 230 V, 50 Hz |
| Rated power P2: | 1.3 kW (1.7 HP) |
| Rated current: | 5.9 A |
| Max. head: | 75 m |
| Head at 4.8 m³/h: | 50 m |
| Delivery port: | 1 1/4" |
| Diameter × length: | 138 × 657 mm |
| Max. immersion depth: | 20 m |
| Power cable: | 15 m H07RN-F |
| Protection / insulation class: | IP68 / F |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
Artur
AVIEN.PL