Pumping Station IVAR.FEKAFOS 1300 DOUBLE KOMPLET VS – 1300 l tank, 2 FEKA VS 1200 T-NA pumps, NG PANEL – SPECIAL OFFER

Code: DBL1300VS
Action
Not rated Rating details
7 223,79 € –10 %
Prečerpávacia stanica IVAR.FEKAFOS 1300 DOUBLE KOMPLET VS – nádrž 1300 l, 2 čerpadlá FEKA VS 1200 T-NA, NG PANEL – AKCIA
7 223,79 € –10 % 6 501,41 € / pcs 5 285,70 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

IVAR.FEKAFOS 1300 DOUBLE KOMPLET VS (code DBL1300VS) is a complete pumping station designed for underground installation. Wastewater from the building flows into a 1300 l tank, from which a pair of sewage pumps pushes it into the discharge pipe. The station includes check valves, a lifting device, and level sensing.

Tank

The self-supporting tank is manufactured by rotational molding from very strong polyethylene and has a watertight lid. It is 2000 mm high, has an outer diameter of 1020 mm, and the inspection neck has an inner diameter of 625 mm. For inflow, a supplied connection for a smooth PVC sewer pipe DN 160 is provided – the hole is drilled using a core drill in the marked flat areas. The discharge is connected using a PE quick coupling in dimensions 6/4" (50 mm) or 2" (63 mm), and the pump and float cables are protected by a AFLEX Ø 50 mm protective sleeve connected to a prepared coupling.

Pumps FEKA VS 1200 T-NA and NG PANEL

Two stainless steel sewage pumps FEKA VS 1200 T-NA (3 × 400 V) have vortex impellers and can pass solid particles up to 50 mm in diameter. Their operation is controlled by the NG PANEL control panel according to level switches; when the maximum level is exceeded, it activates an audible alarm and alarm outputs.

Installation and operation

  • excavation approximately 1 m larger on all sides, with a 15° slope of the walls
  • compacted base of thickness 20–30 cm, backfill compacted in layers of 30 cm
  • in case of high groundwater, a concrete base C12/15 of at least 15 cm thickness and tank anchoring using a stainless steel band
  • under a trafficable surface, a reinforced concrete ring with a cast iron manhole cover, which does not press on the tank (minimum gap of 50 mm)
  • the neck can be adapted to the terrain by shortening or extended up to 50 cm by extension S038 (250 mm) or telescopic extension S039 (500 mm)

Rainwater, groundwater, or water from swimming pools should not be directed into the tank. Installation, electrical connection, and commissioning must be carried out by a qualified person.

Technical specifications

CodeDBL1300VS
ManufacturerIVAR
TypeIVAR.FEKAFOS KOMPLET
Tank volume1300 l
Tank height2000 mm
Outer tank diameter1020 mm
Inner diameter of inspection neck625 mm
Tank materialpolyethylene (rotationally molded)
Pumps2 × FEKA VS 1200 T-NA
Pump power supply3 × 400 V
ControlNG PANEL control panel
Inletconnection for PVC pipe DN 160
Pump impellervortex, solid particles up to 50 mm

Frequently asked questions

How are the two pumps in the FEKAFOS 1300 DOUBLE station controlled?
The FEKA VS 1200 T-NA pumps do not have their own float switches – they are activated by the NG PANEL control panel according to level switches or probes. When the maximum level is exceeded, the panel activates a buzzer and alarm outputs.

Can rainwater be directed into the tank?
No. Only wastewater from the building should be directed into the tank – rainwater, groundwater, or water from swimming pools or aquariums must not be introduced into it.

What if the tank is too low below ground level after backfilling?
The neck can be extended by up to 50 cm using extension S038 (250 mm) or telescopic extension S039 (500 mm). Before installation, a rubber gasket is placed on the inspection opening neck.

How to install the tank in case of high groundwater level?
A concrete base C12/15 of at least 15 cm thickness is made under the tank, and the tank is anchored against buoyancy, for example, using a stainless steel band fixed with anchors M10 or M12.

Additional parameters

Category: DAB.FEKAFOS 280 DOUBLE - automatic pumping stations
Warranty: 2 years
Availability: In stock or at supplier
Code: DBL1300VS
Manufacturer: IVAR
Type: IVAR.FEKAFOS KOMPLET
Tank volume: 1300 l
Tank height: 2000 mm
Tank outer diameter: 1020 mm
Inspection neck inner diameter: 625 mm
Tank material: polyethylene (rotationally moulded)
Pumps: 2 × FEKA VS 1200 T-NA
Pump power supply: 3 × 400 V
Control: NG PANEL control unit
Inlet: connector for PVC pipe DN 160
Pump impeller: vortex, solids up to 50 mm

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.