Q-TERMO Trend 120 KP

Product detailed description

Combined vertical storage water heater Q-TERMO Trend 120 KP

Features:

• Water heating by electric elements and a tube heat exchanger with the option of connection to hot-water central heating systems
• Heat exchanger connection on the side, L – left connection, P – right connection (viewed facing the heater)
• The exchanger works in both forced circulation and gravity systems
• ANTICALC technology with two dry elements protected in a steel sleeve, independently connected to each other
• ANODE TESTER informs the user about the state of the anode protection
• „Anti-freeze“ protection
• Classic functional design of the unit
• Connection to full water pressure (up to 0.8 MPa)
• External rotary thermostat in the range of 0 – 75 °C
• Safety resettable fuse against overheating
• External temperature gauge
• Illuminated water heating switch
• Tank enamelled with a highly resistant zirconium coating resistant to damage, with a special formula
• ECO polyurethane insulation with a low thermal conductivity coefficient ensures lower heat losses than European standards
• Double anode protection of the tank - two anode rods significantly extend the heater's service life
• Pressure relief valve

Technical parameters:

• Volume: 120 l
• Tank inner surface: enamel
• Power supply: 1/N/PE ~ 230 V / 50 Hz
• Total output of heating elements: 2000 W
• Water heating time from 12 to 65°C: 3.6 h
• Mixed water heated to 37°C: 297 l
• Heat losses: 1.35 kWh/24 h
• Active exchanger surface: 0.65 m2
• Average insulation thickness: 32 mm
• Water / heating connection: 1/2"/ 3/4"
• Electrical protection: IP 24
• Weight: 46 kg