QUADRIGA 80V KN (Q8 80 GFKN)
Code: NC-3205Related products
Product detailed description
Heaters in this GFKN series are wall-mounted and produced with a 2 kW output. They are designed for locations with lower demands on the volume and frequency of domestic hot water draw-off. They are Type A1 gas appliances, meaning the flue gases are not specifically vented. For this reason, these appliances must be installed outside living spaces and indirectly ventilated rooms, and the installation must comply with STN EN 1775 in conjunction with TPP 704 01 (STN 38 6441).
- permanent pilot flame
- flue gases discharged into the room
- easy to operate
- does not require an electrical connection
Basic components of QUADRIGA water heaters:
- Polyurethane foam insulation - its density and thickness are greater, and its insulating properties allow for economical operation and fuel savings; heat loss is minimised when this type of insulation is used. The material used does not contain CFC refrigerants.
- Steel tank - made of special steel. The shape of the tank prevents limescale from settling and hardening in places inaccessible to the swirl system, and allows the tank to be cleaned thoroughly (ACD SYSTEM).
- Double-layer titanium enamel - forms the internal protective layer of the tank. This perfectly smooth, glassy porcelain enamel (the so-called VIDRON/E method) prevents limescale particles from adhering to the tank wall and thus protects the tank against corrosion. The tank is tested by the manufacturer at a test pressure of 1.6 MPa (16 bar).
- Magnesium anode rod - provides protection against the effects of electrolytic corrosion. Its weight is 200 g/m² and it is replaceable in every heater.
- Water swirl system - achieved by the flow of water into the tank and a specially shaped end on the inlet pipe, which reaches down to the bottom of the tank. This prevents limescale particles and other impurities from settling and forming a continuous layer on the bottom of the tank, which would shorten the heater's service life, reduce efficiency and increase gas consumption. The swirl system stirs the volume of the tank and flushes out these particles.
- Piezoelectric igniter - simplifies starting up the appliance and is extremely reliable
- Safety valve - combined with a non-return valve and set to an opening pressure of 0.8 MPa (8 bar).
- Drain valve - an opening with a valve at the bottom of the tank, used to drain water from the heater when cleaning the tank, or to connect a hot water circulation loop.
- POLIDORO burner - tiered design, made of stainless steel, characterised by a long service life, high efficiency, low levels of pollutants in the flue gas and complete combustion of the gas.
- Outer casing - meets all aesthetic and technical requirements. The surface paint is applied using an environmentally friendly powder coating method.
- EUROSIT MINISIT 630 combined gas control - with triple protection (a control thermostat, a thermocouple that shuts off the gas supply if it runs low, and an emergency ECO thermostat that switches off if the water in the tank overheats). Built-in gas filter. The control also has an easily accessible temperature regulator (35-70°C), which is easily accessible and simple and trouble-free to operate.
- Flue gas draught retarder - made of stainless steel sheet. This is a specially shaped strip inside the flue that keeps the hot flue gases in the flue for longer, allowing the heat from the flue gases to transfer to the water in the tank around the flue, thereby increasing the heater's efficiency. Once the water is hot, it slows the airflow and so reduces heat loss.
- Condensate collector - a sheet metal tray bent around the combustion chamber. During operation, it prevents condensed water from dripping onto the base of the tank, thereby protecting the main burner and tank stand from damage.
- LPG nozzles - nozzles for use with propane-butane gas can be supplied on request
Additional parameters
| Category: | wall-mounted without flue gas discharge |
|---|---|
| Warranty: | 2 years |
| The item has been sold out… | |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
Ros
ATRIA.SK
matej
atria
peter
atria
jan
atria
About the company
Ariston is a global expert in water heating and heating. We offer people around the world products with Italian design that are an efficient and high-quality solution for their comfort. Thanks to our expertise and deep understanding of customer needs, millions of families around the world have trusted us for more than 50 years. Our products are sold in more than 150 countries around the world.
Ariston is appreciated by professionals and experts for the effort we put into improving the design of our products for the fastest and easiest maintenance and installation. The Ariston brand belongs to the Ariston Thermo Group, a global leader in heating and water heating.
COMPANY HISTORY
1930s / Foundation
Aristide Merloni founded the company “Industrie Merloni” in the Marche region of Italy and began producing scales.
1960s / Water heating
The Ariston brand was established and the production of electric water heaters was launched.
1980s / Heating
In the 1980s, Ariston strengthened its position as a leader in water heating and began producing boilers.
1990s / Expansion
With the launch of sales in China and Russia, Ariston developed into a global brand.
2000s / Brand
The Ariston brand strengthened its position in the field of thermal comfort by defining a new visual identity. Global growth continued with brand expansion from America to Asia.
2010s / Communication
Consumers and customers are at the center of everything Ariston does.
Ariston increases brand awareness through communication and advertising in key countries.
In 2011, the first global campaign was launched.
ARISTON BRAND VALUES
CARE
Our first daily thought is about customers and partners. Our goal is to offer them the best solutions and services related to their needs and requirements in order to improve and simplify their active lives.
RESPECT
With the awareness of responsibility for our future, we make daily decisions in accordance with and with respect for the environment and we look for sustainable solutions. We strive to understand the different cultures in which we live and we emphasize the different needs of our customers.
VISION FOR THE FUTURE
Everything we do has an impact on the future. In this fast-paced world, our role is to anticipate the needs of our customers and partners, to be innovative and to offer intuitive solutions.
YOUR HOME COMFORT IS OUR MISSION
Home is a place where people feel safe and can be themselves, where they are happy and loved. It is a place where we spend pleasant moments. A place full of life and precious moments.
Ariston cares about the daily comfort of people so that they can fully enjoy the precious and pleasant time spent at home, day after day.