DAB QUICK PRESS electronic pressure switch for pumps – without cable, 230 V – SALE
Code: 60219664Related products
Product detailed description
The DAB QUICK PRESS (code 60219664) is an electronic switch that starts the pump as soon as someone opens a tap or another outlet and stops it again once the demand ends. While water is flowing, it keeps flow and pressure in the pipework steady. If there is no water on the suction side, it stops the pump and so protects it against dry running.
Where it is used
- domestic water systems with a surface or submersible pump
- single-phase 230 V pumps up to 2.2 kW (3 HP) and 12 A
- drinking water circuits
Installation and start-up conditions
The switch is fitted vertically, either directly on the pump or between the pump and the first outlet, with the flow arrow pointing upwards. No other fitting may be placed between the pump and the switch – the only exception is a pressure regulator if the pump produces more than 12 bar. The manufacturer recommends adding a membrane vessel of no more than 20 l. The restart pressure of 1.5 bar is fixed, so the pump must reach at least 3 bar with all outlets closed, and the water column between the switch and the highest outlet must not exceed 15 m.
Control panel
The green LED shows that the unit is powered, the yellow one lights up while the pump is running. The Restart button resumes operation after a fault, for example a lack of water. After a power cut the switch restarts by itself once the supply returns.
This code is supplied without a power cable. The electrical connection may only be carried out by a qualified electrician.
Technical data
| Code | 60219664 |
| Manufacturer | DAB |
| Type | DAB.QUICK PRESS |
| Product type | electronic pressure switch ON/OFF |
| Power supply | 1x 230 V (±10 %), 50/60 Hz |
| Max. pump current | 12 A |
| Max. pump power | 2.2 kW (3 HP) |
| Restart pressure | 1.5 bar (fixed) |
| Max. operating pressure | 10 bar |
| Minimum flow | approx. 1 l/min |
| Connection | 1" male thread |
| Protection rating | IP65 |
| Max. water and ambient temperature | 60 °C |
| Power cable | without cable |
Frequently asked questions
Which pump can be used with the QUICK PRESS?
A 230 V surface or submersible pump up to 2.2 kW and 12 A. With all outlets closed, the pump must reach at least 3 bar.
Can the 1.5 bar restart pressure be changed?
No, the restart pressure is set at the factory and cannot be adjusted. The water column between the switch and the highest outlet is therefore limited to 15 m.
Is a power cable included?
No, code 60219664 is the version without cable. The connection to the mains and to the pump must be made by an electrician.
Does the QUICK PRESS need regular maintenance?
No routine maintenance is required. After a long period of operation, the manufacturer recommends checking that the wires are tight in the terminals.
Additional parameters
| Category: | Accessories - Multi-Stage and Self-Priming Pumps |
|---|---|
| Warranty: | 24 |
| Availability: | In stock or at supplier |
| Code: | 60219664 |
| Manufacturer: | DAB |
| Type: | DAB.QUICK PRESS |
| Product type: | electronic pressure switch ON/OFF |
| Power supply: | 1x 230 V (±10 %), 50/60 Hz |
| Max. pump current: | 12 A |
| Max. pump power: | 2.2 kW (3 HP) |
| Restart pressure: | 1.5 bar (fixed) |
| Max. operating pressure: | 10 bar |
| Minimum flow: | approx. 1 l/min |
| Connection: | 1" male thread |
| Protection rating: | IP65 |
| Max. water and ambient temperature: | 60 °C |
| Power cable: | without cable |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!