PPSU press reducing coupling 50 × 32 mm, IVAR.VR PPSU (82850170)

Code: 82850170
Not rated Rating details
32,47 € –19 %
Redukčná vsuvka PRESS-PPSU 50 × 32 mm, IVAR.VR PPSU (82850170)
32,47 € –19 % 25,98 € / pcs 21,12 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

Code 82850170 is a reducing coupling 50 x 32 mm from the IVAR.PRESS system. The larger end is 50 mm and the smaller 32 mm; each is pressed onto pipe of the matching diameter.

  • Use: transition between two diameters of ALPEX, TURATEC and PEX pipe, in heating and in drinking water.
  • Operation: PN 10, temperature +3 to +95 °C.
  • Material: PPSU body, EPDM seal, AISI 304 stainless steel press sleeve and polycarbonate locking ring.
  • Weight: 127 g.

The fittings hold a hygiene approval for drinking water. Joints may be buried in floors, shafts and under plaster and can be pressurised straight after pressing; no open flame is needed. Press according to the system manufacturer's instructions.

Technical data

Code82850170
ManufacturerIVAR
TypeIVAR.VR PPSU
Size50 × 32 mm
Max. working pressurePN 10
Temperature range+3 … +95 °C
Body materialPPSU
Weight127 g

Frequently asked questions

What does the 50 x 32 mm reducer connect?
Two ALPEX, TURATEC or PEX pipes with diameters of 50 mm and 32 mm, pressed radially.

Which operating conditions is the fitting designed for, and can it be used for drinking water?
It is rated for PN 10 and temperatures from +3 to +95 °C. It holds a hygiene approval for drinking water, so it can be used in drinking water lines too.

Additional parameters

Category: connectors press reduced - PPSU
Warranty: 2 years
Weight: 0.127 kg
Code: 82850170
Manufacturer: IVAR
Type: IVAR.VR PPSU
Size: 50 × 32 mm
Max. working pressure: PN 10
Temperature range: +3 … +95 °C
Body material: PPSU
Weight: 127 g

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.