Concealed ball valve set for cold and hot water DN 15 with water meters, FASTEC Quick – IVAR.K4CC DUO – SALE
Code: K4CCEF10200SRelated products
Product detailed description
The IVAR.K4CC DUO set (code K4CCEF10200S) combines shut-off of the cold and hot water supply in a single concealed box with consumption metering – the water meters for both lines are included. It is supplied pre-assembled, which simplifies installation on site.
Valves and operation
- 2 DN 15 ball valves with replaceable ball and seal – Top Entry system, spare part IVAR.KR (code KRTCE415000)
- 90° turn by hand with the IVAR.E 4 control head (code KA00K40011) or motorised with the IVAR.E 104 rotary actuator, which can be integrated into home automation
- gentle Soft Turn closing and full flow – conventional valves have up to 4 times less flow
- non-return valves on the cold and hot water outlets
Consumption metering
The set includes cold and hot water meters (1/2", 1.5 m³/h) with an 80 mm installation length and a 3/4" M connection. The patented meter connection is tightened with an 8 mm key; the meter is installed in the direction of flow and can be sealed. For remote reading, M-BUS or WalkBy communication modules can be added later – with them the installation box depth is 100 mm.
Connection and installation
Pipes are connected with the patented FASTEC Quick IVAR.F 13 fittings – the fitting is pushed into the joint and secured with a locking pin. This allows 16 x 2, 20 x 2 and 26 x 3 mm pipes to be connected. The PS installation box has cutting lines, and the set includes mounting brackets and union nuts for connecting the meters. The set measures 310 x 210 x 85 mm.
Technical data
- max. operating pressure PN 10, operating temperature +5 °C to +90 °C
- body made of CW617N brass, ball made of technopolymer, box made of PS
- compliant with DIN EN 13828 (KTW-W270) and DVGW W 570-1
The IVAR.KPLE 03 design cover plate (white, chrome, silver, matt black), IVAR.F 13 fittings, IVAR.E 4 control head and IVAR.E 104 actuator are ordered separately. The ball valves are used only fully open or fully closed, not for regulation. Installation and connection of electrical components may only be carried out by a competent person with electrical qualifications.
Technical data
| Code | K4CCEF10200S |
| Manufacturer | IVAR |
| Type | IVAR.K4CC DUO |
| Version | concealed set for cold and hot water, with water meters |
| Number of ball valves | 2 pcs |
| Nominal size | DN 15 |
| Pipe connection | FASTEC Quick, F 13 |
| Max. operating pressure | PN 10 |
| Operating temperature | +5 °C to +90 °C |
| Water meters | 2 pcs, 1/2", 1.5 m³/h |
| Meter connection | 3/4" M, installation length 80 mm |
| Dimensions | 310 x 210 x 85 mm |
| Installation box depth | 100 mm (with communication module) |
| Material | body CW617N brass, ball technopolymer, box PS |
| Operation | by hand or IVAR.E 104 actuator |
Frequently asked questions
Is the cover plate included?
No. The IVAR.KPLE 03 design cover plate is ordered separately – in white, chrome, silver or matt black. The FASTEC Quick IVAR.F 13 connecting fittings are also ordered separately.
Can the water meters be read remotely?
Yes, after adding an M-BUS or WalkBy communication module. The module is not part of the set; with it the installation box is 100 mm deep.
Which pipes can be connected to the set?
With FASTEC Quick fittings, pipes measuring 16 x 2, 20 x 2 or 26 x 3 mm can be connected. The fitting is pushed into the joint and secured with a locking pin.
Can the ball valves be used to regulate flow?
No, the valves are only for fully opening or closing. For water systems the manufacturer recommends turning them through their full range once or twice per quarter so that no deposits build up on the seal.
Additional parameters
| Category: | concealed ball valves |
|---|---|
| Warranty: | 24 |
| Type: | accessories |
| Code: | K4CCEF10200S |
| Manufacturer: | IVAR |
| Type: | IVAR.K4CC DUO |
| Version: | concealed set for cold and hot water, with water meters |
| Number of ball valves: | 2 pcs |
| Nominal size: | DN 15 |
| Pipe connection: | FASTEC Quick, F 13 |
| Max. operating pressure: | PN 10 |
| Operating temperature: | +5 °C to +90 °C |
| Water meters: | 2 pcs, 1/2", 1.5 m³/h |
| Meter connection: | 3/4" M, installation length 80 mm |
| Dimensions: | 310 x 210 x 85 mm |
| Installation box depth: | 100 mm (with communication module) |
| Material: | body CW617N brass, ball technopolymer, box PS |
| Operation: | by hand or IVAR.E 104 actuator |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
Kamil
AVIEN.PL
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.