Set of connecting elbows - for CerapurSmart
Code: 7719003263Product detailed description
Set of connecting elbows between the boiler and the mounting plate for CerpaurSmart boilers, marked no. 1215
-
Hello, 1) is the "Junkers set of connecting elbows" needed and suitable for the Junkers Cerapur Compact ZSB 14-1 DE boiler - or does this boiler already have built-in shut-off valves (or are they included in the delivery)? Why is it referred to as "elbows" - since the picture only shows straight pieces? And why are there only 4 valves in the picture when the boiler has 5 outlets that need shut-off valves installed (if they aren't there from the factory)? 2) I wasn't able to find the hydraulic resistance values (zeta) for the PEX-Al-PEX screw fittings in your range. If you don't have them available, could you perhaps tell me the manufacturer's name? (I know that "professionals" don't lack this kind of information - but I'm a layman and amateur ;) thank you, Milan Horniak
-
Hello. 1) You can find the correct mounting plate and the accessories you need here https://www.atria.sk/montazna-doska-prepojovacie-prislusenstvo/ As for the product images, they are often for illustration only. 2) The PEX-AL-PEX screw fittings for heating are part of our offer since they are intended for heating. However, I cannot give you the hydraulic resistance values, and I'm sorry, I cannot verify this either. Have a nice day.
-
Hello, thank you for the answer - however, I still haven't understood whether those valves need to be ordered separately, or whether they are already there, and I don't understand at all why I would need some kind of mounting plate??? I would note that I have already seen many boilers from other manufacturers (specifically Attack, Ferroli, Geminox, Buderus) and - as far as I know - not a single one required any "mounting plate", with the isolating valves either being part of the construction, or at least it being clear that they needed to be added externally. Thank you for your understanding.
-
Hello. You basically don't need the plate. It only serves as an aid for the installers who are going to do the installation. It allows the supply lines to be prepared in advance according to this plate, and then the boiler is simply mounted onto it. This plate already comes fitted with valves. Otherwise, you don't need it at all. Have a nice day
-
Hello, for the product "Mounting plate + accessories" you have listed the Junkers catalogue numbers: 7 719 000 660 and 7 736 900 922. According to the document "Project documentation for Junkers Cerapur Compact boilers [SK]" - chapter 8.1 "Installation accessories" - the code 7 736 900 922 ("connecting pipe between the Cerapur Compact boiler and plate no. 258, 869, 415...") - i.e. no. 492 - is indeed correct, but the "Mounting connection plate for natural gas WITH SHUT-OFF VALVES" - Accessory no. 869 - has the catalogue number 7 719 002 091 (or the whole Set no. 869 + Connection has the number 7 738 502 410). Moreover, the mounting plate no. 258 with catalogue number 7 719 000 660 doesn't appear here at all :( This plate isn't of interest to me anyway, because according to photos found online it contains NO valves at all... I would therefore kindly ask you for information on whether the above-mentioned set no. 7 738 502 410 (or 7 719 002 091 + 7 736 900 922) can be ordered from you, and what its price would be (including VAT).
-
Hello. As I already mentioned, the photos are for illustration only. The necessary valves and the plate are part of the product "Mounting plate + connecting accessories" https://www.atria.sk/montazna-doska-prepojovacie-prislusenstvo/. Only this set can be purchased from us. Have a nice day.
-
Hello, I appreciate your willingness to help and thank you for the quick replies, but your information is unfortunately in stark contradiction with the official information from the Junkers company: https://junkers-cz.resource.bosch.com/media/ttcz/dokumentace/projek_n__podklady/plynov__kondenza_n__kotle/sk_cerapurcompact.pdf - pages 99 to 101 - chapter: "8 Installation accessories", as well as with photos from various online sources. On the other hand, it's starting to become clear to me that this accessory is evidently unnecessary, probably ill-conceived, and clearly overpriced - so I might be the only one bothered by it :) Kind regards, MH
Additional parameters
| Category: | Accessories |
|---|---|
| Warranty: | 2 years |
| Weight: | 1.03 kg |
| EAN: | 4010009200314 |
| Dimensions: | 380 x 244 x 90 mm |
| EAN: | 4010009200314 |
| Gross weight: | 1.05 kg |
| Net weight: | 1.03 kg |
| The item has been sold out… | |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
About the company
For more than 125 years, we have been supplying the market with efficient, easy-to-operate and at the same time reliable equipment that creates warm and cozy homes for people. Bosch Thermotechnology today offers its customers worldwide solutions for room climate, hot water and decentralized energy management.
Since 1932, the brands Junkers and Bosch have been united by a strong partnership. The merger enabled the combination of traditional craftsmanship with the most modern technology. Under the Bosch brand, we now focus on the future with intelligent building technology, in which thermal technology plays an important role.
The traditional brand Junkers continues, because history, tradition and experience are still embedded in every Bosch-branded product. Junkers means more than 120 years of proven technology and the highest quality for us; we proudly created a memorial for this brand with its own museum. At the company in Wernau, we present the continuation of the history and the life's work of the founder Hugo Junkers.
History
In 1886, Robert Bosch founded the "Workshop for Precision Mechanics and Electrical Engineering" in Stuttgart. This was the beginning of today's globally active company. From the very beginning, innovation and social responsibility were characteristic of the company.
1886 - 1905 - The history of the Bosch company begins with many first steps. Steps toward independence, into the automotive market, into markets outside Germany and into the main production hall.
1906 - 1925 - The company's first astronomical global upswing was brutally interrupted by World War I, after which the Bosch company had to transform and focus on innovation to cope with its consequences.
1926 - 1945 - The Bosch company coped with the speed of the economic crisis and the dictates of National Socialism through the power of innovation and perseverance, until World War II brought enormous challenges once again.
1946 - 1959 - At the end of World War II, the Bosch company lost its international branches for the second time. A large part of its production facilities lay in ruins. The following two decades were devoted to reconstruction, but also to entering new business areas.
1960 - 1989 - The period between the 1960s and 1980s was marked in the Bosch company by a transformation that turned it into a diversified group of independently managed divisions, a global company and a market leader in the field of automotive electronics.
1990 - 2016 - The Iron Curtain fell, new markets emerged in Asia and software opened up new opportunities for Bosch. The last three decades brought rapid economic change, which the company had to face head-on.
We are Bosch
Our mission explains what drives us, what we have in common and what we stand for. We want to leave a lasting mark in the world — a mark achieved by a unique, exceptional team.
Our values — what we build on
Our values reflect the way we do business: Our professional ethics in our dealings with our business partners, investors, employees and society.
Future and results orientation
We focus on results. This enables us to secure our future and at the same time
creates a solid foundation for socially beneficial projects of our company and the Robert Bosch Foundation.
Responsibility and sustainability
We act economically and responsibly in the interest of the entire society and the environment.
Initiative and consistency
We act proactively, take entrepreneurial responsibility and are consistent in pursuing our goals.
Openness and trust
We communicate important topics of our company in a timely and open manner. This represents the best foundation for a relationship based on trust.
Fairness
In our mutual contact and with business partners, we consider mutual fairness to be a condition of our success.
Reliability, trustworthiness, legality
We promise only what we can fulfill. We accept agreements as binding and respect and comply with the law in all our business transactions.
Diversity
We value diversity and promote it, because it enriches us and is a source of our successes.
Bosch in Slovakia
Bosch already had its first representation in former Czechoslovakia as early as 1920. It resumed business activities in Prague in the autumn of 1992 and opened its first branch in Bratislava the following year.
The company in Slovakia operates in three locations and employed more than 1,000 employees in 2020 (as of December 31, 2020). The consolidated turnover in 2020 reached 440 million euros.
The regional company represents the commercial, marketing and service activities of the company
Bosch products and services are designed to fascinate and improve the quality of life by providing innovative and useful solutions. Thanks to this, Bosch worldwide offers technologies that are "Created for life."
