Set of industrial stainless steel distributor/collector IVAR.CS 658 with control closures 2" × 3/4", 5-way
Code: 510485Product detailed description
Assembly IVAR.CS 658 2" × 3/4", 5-way combines a stainless steel distributor and collector with a nominal bore DN 50 into one mounting unit. It is suitable for heating and cooling systems as well as industrial piping, where it is necessary to divide a large water flow into 5 branches. The outputs are equipped with thermostatic valves and regulating shut-off valves, so each branch can be adjusted or closed individually.
Construction and Connection
- body made of stainless steel AISI 316L, fittings made of brass CW617N, seals made of EPDM
- side inlets with internal thread 2" and 1", each body has 5 outputs with internal thread 3/4"
- axial distance between outputs 100 mm, body length 500 mm, total length 545 mm
- distance between distributor and collector is selected during installation
- supply and return are color-coded (IN red, OUT blue)
- threads according to ISO 228/1
Operating Parameters
- pressure up to 10 bar, temperature up to +120 °C
- medium: water, or mixture with glycol up to 30 %
- flow through body DN 50: 8200 l/h at 1.0 m/s, 9800 l/h at 1.2 m/s, 12300 l/h at 1.5 m/s
- flow through one output with thermostatic valve: 700, 850 and 1000 l/h at the same velocities
What is included in the package
Distributor body and collector body, regulating and shut-off fittings, 2 ends with manual air vent and swivel drain valve, and mounting brackets. The assembly is delivered disassembled and assembled on site.
Warning: installation, pressure tightness test and commissioning must be carried out by a qualified person. Before starting, the system must be flushed; the manufacturer recommends treating the water with preparation GEL.LONG LIFE 100 or MAYLINE SBA.
The IVAR.CS 658 series is manufactured in sizes 6/4" × 3/4" (DN 40) and 2" × 3/4" (DN 50) with 2 to 12 outputs.
Technical Parameters
| Code | 510485 |
| Manufacturer | IVAR |
| Type | IVAR.CS 658 |
| Number of outputs | 5 on distributor and 5 on collector |
| Dimensions | 2" × 3/4" |
| Nominal bore of bodies | DN 50 |
| Side inlets | internal thread 2" and 1" |
| Outputs | internal thread 3/4" |
| Axial distance between outputs | 100 mm |
| Body length / total length | 500 mm / 545 mm |
| Max. operating pressure | 10 bar (PN 10) |
| Max. operating temperature | +120 °C |
| Medium | water, glycol max. 30 % |
| Material | stainless steel AISI 316L, brass CW617N, seal EPDM |
| Flow through body at 1.0 / 1.2 / 1.5 m/s | 8200 / 9800 / 12300 l/h |
Frequently Asked Questions
For which systems is the IVAR.CS 658 2" × 3/4", 5-way assembly intended?
For heating and cooling systems and industrial piping that require high flow. The working medium is water or its mixture with glycol with a concentration of up to 30 %.
What is included in the package?
Distributor body and collector body, each with 5 outputs, regulating and shut-off fittings, 2 ends with manual air vent and swivel drain valve, and mounting brackets. The parts arrive disassembled and are assembled only during installation.
What flow can the assembly handle?
The body DN 50 is dimensioned for 8200 l/h at a speed of 1.0 m/s, 9800 l/h at 1.2 m/s and 12300 l/h at 1.5 m/s. One output with a thermostatic valve can handle 700, 850 and 1000 l/h at these speeds.
How to fill and vent the assembly after installation?
After tightening the connections, a pressure tightness test is performed. Then, a filling hose is connected to the filling/draining valve and the manual air vent is opened – when no more air escapes from it, the filling is complete.
Additional parameters
| Category: | Industrial Manifolds |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | 510485 |
| Manufacturer: | IVAR |
| Type: | IVAR.CS 658 |
| Number of outlets: | 5 on the flow and 5 on the return manifold |
| Size: | 2" × 3/4" |
| Nominal size of bodies: | DN 50 |
| Side inlets: | female thread 2" and 1" |
| Outlets: | female thread 3/4" |
| Outlet centre distance: | 100 mm |
| Body length / overall length: | 500 mm / 545 mm |
| Max. operating pressure: | 10 bar (PN 10) |
| Max. operating temperature: | +120 °C |
| Medium: | water, glycol max. 30% |
| Material: | stainless steel AISI 316L, brass CW617N, EPDM seal |
| Body flow at 1.0 / 1.2 / 1.5 m/s: | 8200 / 9800 / 12300 l/h |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.