Set of leveling wedges SIXTOL SX3107 Level System T-Hold 2mm 500 pcs

Product detailed description

The quality leveling clips LEVEL SYSTEM T-HOLD set for levelling tiles and slabs. These clips are used in combination with leveling wedges and pliers during tile installation - insert the clips into the joints according to the width of the joint, insert the wedge into the clip and use special leveling pliers to align the tiles or slabs into one plane. As soon as the adhesive under the tiles has hardened, tap the clips out using a rubber mallet, embed the joints and you're done. Wedges, pliers and the mallet are not part of this set and must be purchased separately if needed. Simple, fast and precise tile laying. Eliminates height irregularities between tiles and slabs, so-called lippage. Suitable for tiles and slabs made of all materials and shapes. Application: 1. During installation, insert the clips into the joints between tiles or slabs according to the required joint width. 2. Insert wedges into all clips. 3. Using leveling pliers, pull the first wedge into the clip until the tiles are level. 4. According to the first wedge, tighten the fixing screw on the pliers so that the rest of the tiles or slabs can be pulled with the same force. 5. Tighten the remaining wedges. 6. After the adhesive has hardened (usually after 24 hours), remove the clips by tapping the rubber mallet from the side in the direction of the joint. Note: Wedges can be used repeatedly. Note: For proper removal of clips using the mallet, the joint must be clean. Technical specifications: Thickness: 2 mm. Width: 36 mm. Height: 40 mm. Material: plastic. For tiles/thickness: 4 - 15 mm. Package contents: 500 x Leveling clips 2 mm