Surface-mounted manifold cabinet IVAR.N-MR 4 with provision for a control unit – width 845 mm

Code: I006040
Not rated Rating details
218,94 € –20 %
Skriňa rozdeľovača nástenná IVAR.N-MR 4 s prípravou pre riadiacu jednotku – šírka 845 mm
218,94 € –20 % 175,15 € / pcs 142,40 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

The IVAR.N-MR 4 cabinet is mounted on the wall surface and houses an underfloor heating manifold or a mixing set together with its control unit. A partition creates a separate compartment for the electronics, and cables pass through rubber grommets that protect them from chafing.

Dimensions and capacity

  • width 845 mm, height 780 mm, depth 157 mm
  • manifold without mixing set: up to 12 outlets
  • manifold with mixing set: up to 9 outlets

Design and installation

The body is made of 0.8 mm galvanised steel sheet; the visible parts are finished in white RAL 9003 powder paint. Perforations in the side walls make it quick to open holes for flow and return pipes – from the left or the right, depending on where the pipework comes from. The rear panel is removable, so the cabinet is easier to fix and the pipes easier to connect. The manifold is screwed onto an adjustable bracket that sets both its height and its depth inside the cabinet. The door closes with a coin lock.

The IVAR.N-MR range comes in widths of 485, 615, 760, 845 and 1015 mm; choose the size by the number of manifold outlets and by whether a mixing set will also sit in the cabinet.

Technical data

CodeI006040
ManufacturerIVAR
TypeIVAR.N-MR 4
Kindsurface-mounted manifold cabinet with provision for a control unit
Width845 mm
Height780 mm
Depth157 mm
Max. manifold outlets without mixing set12
Max. manifold outlets with mixing set9
Materialgalvanised steel sheet 0.8 mm
Finishwhite powder paint RAL 9003 (visible parts)
Equipmentpartition, rubber grommets, adjustable bracket, removable rear panel
Lockcoin lock

Frequently asked questions

How large a manifold fits into the IVAR.N-MR 4 cabinet?
According to the manufacturer, a manifold with up to 12 outlets if there is no mixing set in the cabinet. With a mixing set, it is a manifold with up to 9 outlets.

Can the cabinet be recessed into the wall?
No, IVAR.N-MR 4 is a wall cabinet designed for surface mounting. It is 780 mm high and 157 mm deep.

From which side can the pipes enter the cabinet?
From the left or the right. The side walls have perforations from which openings for flow and return are made to suit the site.

Is the control unit included with the cabinet?
No, the cabinet only provides a prepared space separated by a partition and rubber grommets for cables. The control unit and the manifold are ordered separately.

Additional parameters

Category: wall-mounted cabinets N-KLASIK, N-MAX
Warranty: 2 years
Code: I006040
Manufacturer: IVAR
Type: IVAR.N-MR 4
Kind: surface-mounted manifold cabinet with provision for a control unit
Width: 845 mm
Height: 780 mm
Depth: 157 mm
Max. manifold outlets without mixing set: 12
Max. manifold outlets with mixing set: 9
Material: galvanised steel sheet 0.8 mm
Finish: white powder paint RAL 9003 (visible parts)
Equipment: partition, rubber grommets, adjustable bracket, removable rear panel
Lock: coin lock

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.