SLEEK – linear drain 90 cm from AISI 304 stainless steel

Product detailed description

The linear drain SLEEK with a length of 90 cm (900 mm) is made of AISI 304 stainless steel. The bottom channel has a thickness of 1.2 mm and the cover has a thickness of 1.5 mm. The channel is 62 mm wide and its installation depth is 52 mm, which should be taken into account already during the planning of the floor construction.

Main Features

• material: AISI 304 stainless steel
• bottom channel with a thickness of 1.2 mm, cover with a thickness of 1.5 mm
• width 62 mm, installation depth 52 mm
• surrounding flange 2 cm wide
• cover with sound-dampening spacers for falling water
• 40 mm trap, cleaned from the top
• reduction 50/40 mm and drain pipe with a diameter of 40/50 mm
• adjustable feet for leveling the channel
• trap capacity 30 l/min

Technical Data

Available Lengths

The SLEEK range in this steel version is available in lengths of 500, 600, 700, 800, 900, 1000, 1100 and 1200 mm. This product has a length of 900 mm and each size is packed in one piece.

Usage and Installation

The linear drain drains water along the entire length of the channel, so it is important to embed it in such a way that the floor slopes towards it. The adjustable feet help to set the height, the surrounding flange with a width of 2 cm serves as a surface for connecting the surrounding floor, and the sound-dampening spacers under the cover reduce the noise of falling water. The trap is cleaned from the top, so it can be maintained directly from above. The channel is connected to the waste with a pipe of 40 or 50 mm diameter, for which the included reducer is used.

Frequently Asked Questions

From where is the trap of the SLEEK 90 cm drain cleaned?

The 40 mm trap is designed to be cleaned from the top.

What diameter of drain pipe can be connected?

The drain pipe has a diameter of 40/50 mm and the reducer 50/40 mm is also included.

What depth do I need for installation?

The installation depth of the drain is 52 mm.