SLIM SQUARE BAR – linear drain 50 cm

Product detailed description

SLIM SQUARE BAR in length of 50 cm (500 mm) is a compact linear drain made of stainless steel. The bottom channel has a thickness of 1.2 mm, the perimeter flange is 2 cm wide, and the cover is height adjustable. It is suitable where you need to drain water along a shorter line than with longer lengths of the SLIM series.

Main Features

• bottom channel thickness 1.2 mm
• perimeter flange width 2 cm
• height adjustable cover
• mounting depth 55 mm
• material: stainless steel
• length 500 mm (50 cm), finish SQUARE BAR

Technical Data

Finishes and Lengths

The SLIM series is available in lengths of 500, 600, 700, 800, 900 and 1000 mm. Two finishes are available: ROUND BAR and SQUARE BAR. According to the manufacturer's data, they have the same parameters and differ only in designation, with the SQUARE BAR finish including the letter K in the product index (e.g., ODPLYW.SLIM.K.1000). This product is in the SQUARE BAR finish and has a length of 500 mm.

Application and Installation

When installing the drain, allow for a depth of 55 mm and slope the floor towards the channel so that water runs along its entire length. The cover can be adjusted to the desired height, making it possible to adapt to the thickness of the floor covering. The 2 cm wide perimeter flange helps in connecting the waterproofing, so do not neglect it during installation. The exact installation procedure is determined by the manufacturer's documentation.

Common Questions

Is the cover of the SLIM SQUARE BAR 50 cm adjustable in height?

Yes, the cover is height adjustable.

What is the width of the flange?

The perimeter flange is 2 cm wide.

How does the SQUARE BAR 50 cm differ from the ROUND BAR 50 cm?

According to the manufacturer's data, they have the same parameters; they differ only in designation and product index, which includes the letter K for SQUARE BAR.