Dew point sensor IVAR.TER-SRB for Thermia ITEC XT, ITEC ECO, ATHENA – with 24 V transformer
Code: IHP086U9240Product detailed description
What it is for
When the heat pump cools in summer, the water temperature in the supply pipe can drop below the dew point of the surrounding air. Moisture then condenses on the pipe surface. The IVAR.TER-SRB kit detects this condition and passes the information on to the electrical installation of the Thermia heat pump.
Kit features
- designed for Thermia ITEC XT, ITEC ECO and ATHENA heat pumps
- the sensor is fixed directly to the supply pipe
- includes a box with a 24 V transformer powered from the 230 V mains
- sensor and box are linked by a 3000 mm cable
- sensor terminals V+, GND, NC, COM and NO
Wiring
The sensor contact is wired to the heat pump terminal block exactly according to the diagram in the technical data sheet. As the device runs on mains voltage, the connection must be made by a qualified electrician.
For installations where no transformer is needed, the range also includes the wired Danfoss CF-DS 24 V sensor without transformer (code IHP088U0251).
Technical data
| Code | IHP086U9240 |
| Manufacturer | Thermia |
| Type | IVAR.TER-SRB |
| Product type | dew point sensor (kit) |
| Compatibility | Thermia ITEC XT, ITEC ECO, ATHENA |
| Sensor location | supply pipe |
| Power supply | 230 V AC |
| Transformer | 24 V, included in the kit |
| Cable length to sensor | 3000 mm |
Additional parameters
| Category: | accessories for IVAR.HP ATEC, ITEC heat pump series |
|---|---|
| Warranty: | 2 years |
| Code: | IHP086U9240 |
| Manufacturer: | Thermia |
| Type: | IVAR.TER-SRB |
| Product type: | dew point sensor (kit) |
| Compatibility: | Thermia ITEC XT, ITEC ECO, ATHENA |
| Sensor location: | supply pipe |
| Power supply: | 230 V AC |
| Transformer: | 24 V, included in the kit |
| Cable length to sensor: | 3000 mm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.