Solar panel PNI PSF6020A 60 W with 20 Ah battery and 12 V output for cameras

Product detailed description

The PNI PSF6020A is a 60 W solar panel with a built-in 20 Ah battery that powers a 12 V security camera even in locations without an electrical grid. The built-in battery can power the camera for up to 60 hours, so you won’t lose power immediately even without sunlight. The camera is not included in the package.

The monocrystalline panel quickly charges the battery. The charge status is indicated by an LED on the metal bracket: it flashes red when the charge is below 25 %, and stays green when the battery is fully charged.

The package also includes a multifunctional bracket that can be mounted on a wall or a taller pole, and a support for the camera with multiple mounting options to accommodate as many camera models as possible.

Installation and placement

The panel should be placed where it will receive sunlight for as long as possible, and oriented to the south or southwest. The angle of inclination and direction can be adjusted on the bracket. The dimensions are 580 × 500 × 25 mm and the weight is approximately 5.8 kg. The operating temperature range is −26 to +80 °C.

The output is 12 V / 4 A, so please check that the camera’s power consumption is within the battery’s capacity.

Frequently asked questions

Is the camera included in the package?
No, only the panel with the battery and bracket are included.

How can I tell if the battery is charged?
By the LED on the bracket: red flashing means less than 25 %, a steady green light indicates a fully charged battery.

Where should I install it?
In a location with the best possible sunlight exposure, oriented to the south or southwest.

Technical specifications