Combustion chamber ceramics for C18S, AC25S, DC24RS, DC30RS, CxxSP boilers

Code: C0031

Not rated Rating details

Brand: Atmos

Stacionárny kotol Guľový priestor do kotlov C18S, AC25S, DC24RS, DC30RS, CxxSP

173,92 € / pcs 141,40 € excl. VAT

International delivery

Detailed information

Product detailed description

Low-profile combustion chamber, 310 mm

The C0031 set is original ATMOS ceramic, 310 mm long, in a low profile. Depending on the boiler type, it is fitted either in the lower or in the middle chamber.

Where it is fitted	Boilers
lower chamber	DC14R, C18, DC30RS, DC24RS, AC25S, C18S
middle chamber for coal heating (three-chamber combination boilers)	ACxxSP(L), C25SP(L), C18SP(L)

What the set consists of

rear panel DC0091 – 1 pc,
right side C0054 – 1 pc,
left side C0053 – 1 pc.

Frequently asked questions

How do I choose the correct output of a solid fuel boiler? Start from the calculated heat loss of the heated building. With wood/coal boilers, however, also consider that the boiler burns for several hours on a single load at essentially constant output - which is why it is common practice to add a buffer tank (accumulation tank) to the boiler, which stores the excess heat for later use instead of the boiler having to be throttled down inefficiently.
What else do I need to install this boiler? Besides the boiler itself, the system usually requires: a buffer (accumulation) tank of adequate volume, a circulation pump (often with a built-in Laddomat or a thermostatic valve to protect the boiler against low-temperature corrosion), a safety valve, an expansion vessel, and a flue/chimney with sufficient draught matching the boiler output - you will find the exact chimney draught values in the technical parameters above.
What fuel is suitable and what is not? Use only the fuel recommended by the manufacturer for the given model (usually log wood of a defined length and moisture content, or brown coal briquettes or coal, depending on the boiler type) - unsuitable or too wet fuel reduces efficiency, increases the formation of tar and deposits, and can damage the boiler.
What about chimney inspection and legislation? Before the boiler is put into operation, and also regularly during its use (usually once a year for solid fuels), an inspection/sweeping of the chimney by an authorised chimney sweep is required by law - without the relevant inspection certificate, an insurance claim in the event of a fire may be disputed.
How much maintenance does the boiler require? It usually includes regular removal of ash and cleaning of the heating surfaces/flue gas passages of soot (the interval depends on intensity of use, usually in the order of weeks), and a thorough inspection once a year, including the seals and the chimney.
Can I install the boiler myself? The positioning and connection of the boiler to the heating system, chimney and safety devices should be carried out, or at least checked, by a qualified heating engineer - it is an appliance with an open fire, high temperatures and pressure components, where a mistake in connection can pose a safety risk.

Additional parameters

Category:	ball-shaped insert for the lower chamber
Warranty:	2 years
Weight:	9999 kg
Contents of the package:	1x left side C0053, 1x right side C0054, 1x rear panel DC0091
Length:	310mm (low profile)

Product rating

Be the first who will post an article to this item!

Name

E-mail

Comment

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Company History

The family company ATMOS was founded in the Czech Republic in 1935. In the beginning, production was focused on gasifier power units for cars and boats under the brand name DOKOGEN, i.e. the same principle used in modern gasifier boilers for wood and coal.

: Boat with a DOKOGEN wood gas generator on the Vltava River in Prague, 1943

: ARO 204 with a DOKOGEN wood gas generator, 1985

: Since 1945, the company has developed and produced ATMOS compressors, which were exported worldwide until nationalization in 1951.

: Finished compressors

: Production of ATMOS compressors, 1948

Despite the German occupation and communist dictatorship, it was possible to maintain the development of wood boilers, gasifier units and compressors. In 1980, at the Pragotherm exhibition, the first wood gasifier boilers and wood waste boilers were presented. To date, 90 types of hot water boilers have been developed, for which the company holds 15 patents. One of the first developed boilers was the EKONOMIK boiler in 1968.

: EKONOMIK boiler 1968

: Kombiterm boiler range

To ensure the European market with quality boilers that save the environment and energy, three generations of the Cankář family are currently working in the family business. The founder of the company, Jaroslav Cankář senior, passed away in March 2006 at the age of 94.

Company ATMOS – present

Atmos is a Czech family company and currently one of the largest European manufacturers of solid fuel boilers. The company exports more than 60% of its production abroad, mainly to Germany, Austria, Sweden, Italy, France, Romania, Poland, Bulgaria, Denmark, Slovakia, Lithuania, Latvia, Ukraine, Belarus, Spain, the United Kingdom, etc.

The product range includes solid fuel boilers, gasification boilers for wood from 15 to 150 kW, gasification boilers for brown coal (and wood) from 16 to 48 kW, gasification boiler for brown coal briquettes and black coal with a power of 16 and 26 kW, automatic pellet boilers from 4.5 to 80 kW and combined boilers for gasification of wood in combination with a pellet burner in power from 20 to 35 kW. Products of the company Atmos have aroused great interest among users heating with wood and installers, due to their good functionality, quality and, last but not least, very favorable price.

The goal of the company ATMOS is to be one of the best boiler manufacturers in Europe. To be a company that values its tradition, experience and the ATMOS brand