Spiral hose Azuro S07, inner diameter 50 mm, coil 30 m

Product detailed description

The Azuro S07 hose with an internal diameter of 50 mm is a flexible hose made of softened PVC, reinforced with a rigid PVC spiral. The outer diameter of this variant is 57.2 mm and the coil has a length of 30 m.

Out of the entire Azuro S07 range, this is the largest and heaviest of the five variants in the series, with the coil weighing 24.15 kg. When ordering, therefore, pay particular attention to the internal diameter, as it is the only dimension that varies between the different variants.

Main Features

• material: softened PVC with a rigid PVC spiral reinforcement, which is impact-resistant
• transparent green hose with a white spiral
• smooth inner surface, slightly ribbed outer surface
• internal diameter 50 mm, external diameter 57.2 mm
• operating pressure 5 kg/cm², burst pressure 15 kg/cm²
• operating temperature range from -10 °C to +60 °C
• 30 m coil length with a weight of 24.15 kg

Technical Data

The Azuro S07 series is available in internal diameters of 25, 32, 38, 40 and 50 mm. Variants 25 and 32 mm have an operating pressure of 5.5 kg/cm² and a burst pressure of 16.5 kg/cm², while variants 38, 40 and 50 mm have an operating pressure of 5 kg/cm² and a burst pressure of 15 kg/cm².

Application

The hose is used in gardening, construction and agriculture for suction, transport and discharge of liquid and bulk materials under light load. During suction, a vacuum is created inside the hose, which could compress the soft wall inward, which is why it is reinforced with a spiral. For connection, use fittings with a size of 50 mm and do not exceed the operating pressure of 5 kg/cm².

Frequently Asked Questions

What substances is the Azuro S07 hose suitable for?

The hose is used for suction, transport and discharge of liquid and bulk materials, but only under light load.

Why does the hose have a spiral?

The rigid PVC spiral, which is impact-resistant, reinforces the softened hose wall. The inner surface remains smooth and the outer surface is slightly ribbed.

What pressure can the 50 mm diameter hose withstand?

The operating pressure is 5 kg/cm². The burst pressure of 15 kg/cm² is the limit at which the hose will fail and should not be used in normal operation.