Toilet Flush Valve for Sink, Brass, Chrome

Product detailed description

Brass flush valve with a chrome surface is intended for the sink. It is connected by a G 1/2″ thread and is equipped with a strainer that captures impurities from the water supply before they reach the valve mechanism.

Main Features

• material: brass, color: chrome
• connecting thread G 1/2″
• strainer is part of the valve
• valve is classified into class 1.5 l
• an approximate force of 14 N is sufficient to activate it
• flow duration at a pressure of 0.3 MPa is approximately 7 s

Technical Data

Usage and Installation

Before installation, check that the pressure in the system is within the recommended range of 0.1 to 0.4 MPa and does not exceed 1 MPa. The water temperature should not be higher than 25 °C. The G 1/2″ threaded connection must be properly sealed and checked for leaks after tightening. We recommend leaving the strainer in place, as it protects the valve from sand and small fragments that may occasionally enter the pipes after construction work. The limited flow duration means that water does not flow longer than necessary.

Frequently Asked Questions

What water pressure does the valve require?

The recommended pressure is between 0.1 and 0.4 MPa. The maximum working pressure of the valve is 1 MPa.

What connection does the valve use?

The valve is connected via a G 1/2″ thread.

Is the strainer part of the valve?

Yes, the strainer is included in the valve and protects its internal parts from impurities.