Split Air Conditioner TRIAL INVERTER IVAR.XREVO-24T – 3 Wall Units, Cooling 7.0 kW / Heating 5.8 kW

Product detailed description

Assembly and Performance

IVAR.XREVO-24T is an inverter-type TRIAL air conditioner from the Italian manufacturer EMMETI. One outdoor unit X-REVO-2423TE with a rotary compressor supplies three wall-mounted indoor units – two X-REVO-0924W with cooling capacity of 2.60 kW each and one X-REVO-1224W with a capacity of 3.10 kW. The nominal cooling capacity of the assembly is 7.0 kW, and the inverter smoothly varies it in the range of 2.50–9.60 kW. When heating, it operates as an air-to-air heat pump and at an outdoor temperature of -10 °C it delivers 5.8 kW of heat.

Energy Efficiency

• cooling: energy class A++, SEER 6.5, annual electricity consumption 377 kWh
• heating: energy class A, SCOP 3.9, annual electricity consumption 2100 kWh
• EER 3.85 and COP 4.20 under nominal conditions
• refrigerant R32, charge 1.46 kg (0.99 t CO2 equivalent)

Equipment and Control

Commands are given via an infrared remote control: cooling COOL, heating HEAT, dehumidification DRY, ventilation FAN and automatic mode SMART, desired temperature 16–30 °C. Further available functions include SUPER for rapid cooling or heating, quiet mode QUIET, economy mode ECONOMY, night mode SLEEP, timer TIMER, I FEEL with a temperature sensor in the remote, maintaining 8 °C during heating, cleaning mode CLEAN and automatic restart with the original settings after a power outage. For control via the ConnectLife app from a phone, a separate WiFi controller I07917566 is supplied, which connects to the control board of the indoor unit. The indoor units have noise levels of 38–24 dB(A) (sound pressure), air flow up to 600 m³/h and each dehumidifies 1.0 l of water per hour; the outdoor unit achieves a sound pressure of 41 dB(A).

Installation and Maintenance

Each indoor unit is connected to the outdoor unit by its own pair of refrigerant pipes 6.35 mm (1/4") and 9.52 mm (3/8"). The route to one indoor unit can be up to 25 m, all routes together 50 m; the vertical difference between the outdoor and indoor unit is up to 15 m, between indoor units up to 7.5 m. The outdoor unit with IPX4 protection cools at outdoor temperatures from -15 to 50 °C and heats at -15 to 24 °C, powered by single-phase 230 V / 50 Hz (max. draw 17.3 A). Refrigerant R32 is flammable, so installation, commissioning and service belong exclusively to a qualified technician. Air filters are cleaned every 100 hours of operation, approximately once every two weeks in dusty environments; the entire system is recommended to be checked once every two years by the manufacturer.

Measurement Conditions: cooling at room temperature 27 (19) °C and outside 35 °C, heating at 20 °C in the room and -10 °C outside.

Technical Specifications

Frequently Asked Questions

What indoor units does the IVAR.XREVO-24T assembly include?
Three wall-mounted units: two X-REVO-0924W with cooling capacity of 2.60 kW each and one X-REVO-1224W with a capacity of 3.10 kW. All are connected to the common outdoor unit X-REVO-2423TE.

How long can the pipe to the indoor units be?
Up to 25 m to one indoor unit, all routes together up to 50 m. The vertical difference between the outdoor and indoor unit can be up to 15 m, between indoor units up to 7.5 m.

Does the assembly heat in winter?
Yes, it operates as an air-to-air heat pump and at an outdoor temperature of -10 °C it delivers 5.8 kW of heat (class A, SCOP 3.9). The outdoor unit heats down to an outdoor temperature of -15 °C.

How often are the filters of the indoor units cleaned?
Every 100 hours of operation, approximately once every two weeks in dusty environments. It is sufficient to vacuum the filter, in case of heavy soiling it can be washed in lukewarm water and dried in the shade.