Stainless steel linear drain SIMPLE 70 cm

Product detailed description

The linear gutter SIMPLE with a length of 70 cm (700 mm) is a drain made of stainless steel AIS 304 with a brushed Inox finish and a pattern on the surface. Water is collected along the entire length of the gutter and flows through a 40 mm diameter trap into the waste pipe. The trap is cleaned from above.

Main features

• material: stainless steel AIS 304, brushed Inox surface with pattern
• gutter base thickness 1.2 mm, cover thickness 1.5 mm
• surrounding flange 2 cm
• cover with distance dampers that reduce the noise of falling water
• 40 mm trap cleaned from above and reduction 50/40 mm
• adjustable feet for setting the height of the gutter
• drain pipe with diameter 40/50 mm

Technical data

Application and installation

During installation, the gutter is placed on adjustable feet and the height is adjusted so that it fits properly into the floor. The floor should slope towards the gutter to allow water to flow smoothly into the drain. The drain pipe with a diameter of 40/50 mm is connected to the waste pipe; if necessary, a 50/40 mm reducer is available. Since the trap is cleaned from above, there is no need for access from below.

Lengths of the SIMPLE range

The SIMPLE range is available in lengths of 500, 600, 700, 800, 900 and 1000 mm. This variant has a length of 700 mm and a net weight of 2.8 kg.

Frequently asked questions

How is the trap of the SIMPLE gutter cleaned?

The 40 mm trap is designed to be cleaned from above.

What kind of steel is the gutter made of?

It is made of stainless steel AIS 304. The base of the gutter has a thickness of 1.2 mm and the cover 1.5 mm.

What diameter does the drain pipe have?

The drain pipe has a diameter of 40/50 mm, and a 50/40 mm reducer is also available.