Stainless Steel Manifold, 10-way, for Underfloor Heating
Code: HR1103-10Related products
Product detailed description
Stainless Steel Manifold, 10-way, for Underfloor Heating
The manifolds are made of high-quality stainless steel according to the German standard DIN EN 1264-4:2009-11. The manifolds can be used with all types of plastic pipes, including multilayer pipe and copper. Pipes are connected using a 3/4"EK compression fitting. Manifolds for underfloor heating are equipped with dual-control flow meters with a flow indicator (Regolux 0-5L/min) with memory, and thermostatic valves (with M30 x 1.5 connection) on each circuit, so that each heating circuit can be regulated separately. The manifold also includes automatic air vent valves, rotary drain valves and nickel-plated brackets.
Frequently asked questions
- Which pipes is the manifold suitable for? For all common plastic and multilayer underfloor heating pipes as well as copper pipes. The pipes are connected with 3/4″ Eurocone compression fittings chosen to suit the pipe diameter.
- Can each circuit be controlled separately? Yes. Each circuit has a 0–5 l/min flow meter for balancing and a thermostatic valve with M30 × 1.5 thread, on which an electrothermal actuator can be fitted to control the circuit with a room thermostat.
- What is included with the manifold? Besides the flow meters and thermostatic valves, automatic air vents, rotating drain valves and nickel-plated mounting brackets.
Additional parameters
| Category: | Stainless Steel Manifolds |
|---|---|
| Warranty: | 2 years |
| Fitting: | Press-Messing Ms 58, nickel-plated |
| Manifold length without ball valves: | 595 mm |
| Manifold length with ball valves: | 645 mm |
| Country of origin: | Germany |
| Liquids: | heating water, cooling water, water mixtures with standard anti-corrosion antifreeze additive |
| Material type: | brass, heat-resistant plastics, stainless steel 1.4301 |
| Max. working pressure: | 4 - 6 bar |
| Max. permissible operating temperature: | + 80 °C |
| Max. permissible operating pressure: | 6 bar |
| Max. test pressure: | 10 bar |
| Recommended tubing: | PEX-AL-PEX 16 x 2 |
| Recommended connections: | Compression fitting for ALPEX 16 x 2 ALU-EK pipe |
| Recommended cabinets: | Manifold cabinets |
| Flat gasket: | WS 3825 |
| Number of circuits: | ten |
| Measuring accuracy: | +/- 10 % |
| Flow rate: | 1,12 m3/h |
| Flow meters: | dual-regulation with locking option |
| Branch connection: | Ek, Eurocone |
| Inlet and outlet connection: | 1" |
| Permissible liquid temperatures: | - 10 °C to 120 °C |
| Measuring range: | 0-5 l/min |
| Gasket: | EPDM |
| Intended use: | heating and cooling systems |
| Thread: | DIN ISO EN 228-1 |
| Sound insulation: | DIN 4109 |
Product rating
Be the first who will post an article to this item!
Leave a rating
List of ratings
Discussion
List of discussions
Palo