Submersible 3" pump IVAR WPS 3-16 P KIT for boreholes and wells – 0.55 kW, 1 × 230 V, with starter box (IVAR.WPS 3-16 P KIT) – SPECIAL OFFER
Code: 3030161CEProduct detailed description
IVAR WPS 3-16 P KIT (code 3030161CE) is a single-phase 3" submersible pump with a diameter of 74 mm for drilled wells. It is suitable for supplying water to households, cottages and family homes, for garden irrigation and for use in tanks and can handle continuous and intermittent operation. The kit includes a pump with a starting control unit (starter box) and 30 m submersible flat cable.
Performance of model 3-16
The motor with power P2 0.55 kW (0.75 HP) draws current 4.2 A at full load. The pump achieves a head of 64 m at zero flow, 40 m at rated flow 3 m³/h and 28 m at flow 3.5 m³/h. The total length of the electric pump is 981 mm, weight 8.9 kg.
Construction
- pump body from stainless steel, suction and discharge connection from copper casting
- floating impellers from polyacetal resistant to wear and diffusers from polycarbonate
- shaft and coupling from stainless steel AISI 304, motor adapter according to NEMA standard
- rewirable submersible motor IVAR.WPS with oil filling, parts in contact with water from stainless steel
- built-in check valve and discharge G 1"
Installation conditions
Water may have a maximum of 35 °C, pH 6.5 to 8.5, solid particles up to 2 mm and sand content up to 300 g/m³. The pump must be fully submerged, up to a depth of 80 m, and is mounted vertically – maximum inclination 30°, horizontal installation is prohibited. The supply cable 3G1 mm² has a length of 30 m. The pump must be grounded and protected by a residual current device; the connection is performed by a qualified person.
Technical parameters
| Code | 3030161CE |
| Manufacturer | IVAR |
| Type | IVAR.WPS 3-16 P KIT |
| Finishing | pump with starter box and cable 30 m |
| Pump diameter | 74 mm (3") |
| Power P2 | 0.55 kW (0.75 HP) |
| Power supply | 1 × 230 V, 50 Hz |
| Current at full load | 4.2 A |
| Max. discharge head | 64 m |
| Rated flow | 3 m³/h |
| Discharge connection | G 1" |
| Total length | 981 mm |
| Weight | 8.9 kg |
| Max. submersion depth | 80 m |
| Max. water temperature | 35 °C |
Frequently asked questions
What does the designation WPS 3-16 P mean?
The first number indicates the rated flow in m³/h (3 m³/h), the letter P is the material code (polycarbonate). The pump has a size of 3" and a diameter of 74 mm.
Can the pump operate horizontally?
No. The pump is installed vertically, a maximum inclination of 30° is allowed; horizontal installation is prohibited. During operation, it must be fully submerged.
What is included in the delivery?
Pump with built-in check valve, starting control unit (starter box) and 30 m blue submersible flat cable 3G1 mm².
Additional parameters
| Category: | DAB.S4 OL - submersible 4" pumps with oil-filled motor |
|---|---|
| Warranty: | 2 years |
| Weight: | 8.9 kg |
| Availability: | In stock or at supplier |
| Code: | 3030161CE |
| Manufacturer: | IVAR |
| Type: | IVAR.WPS 3-16 P KIT |
| Version: | pump with starter box and 30 m cable |
| Pump diameter: | 74 mm (3") |
| Output P2: | 0.55 kW (0.75 HP) |
| Power supply: | 1 × 230 V, 50 Hz |
| Full-load current: | 4.2 A |
| Max. head: | 64 m |
| Nominal flow: | 3 m³/h |
| Discharge: | G 1" |
| Total length: | 981 mm |
| Weight: | 8.9 kg |
| Max. submersion depth: | 80 m |
| Max. water temperature: | 35 °C |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.