Submersible sewage pump DAB.FEKA VS 1100 M-A, all-stainless steel, 1×230 V with float switch, particles up to 50 mm – SPECIAL OFFER
Code: 60219350HProduct detailed description
DAB.FEKA VS 1100 M-A (code 60219350H) is a submersible sewage pump whose body, motor housing and terminal cover with handle are made of stainless steel AISI 304. The precisely cast stainless steel vortex impeller can pass solid matter with a diameter of up to 50 mm, so the pump can handle non-aggressive waste and sewage water. The maximum pumping head is 14 m and the maximum flow rate is 32 m³/h.
Version M-A
The single-phase motor for 1×230 V has a permanently connected starting capacitor and built-in temperature sensors that protect the winding from overheating. A float switch turns the pump on and off automatically according to the water level, and the supply cable H07RN-F with a length of 10 m is terminated with a Schuko plug.
Construction
- dry two-pole asynchronous motor, hermetically sealed and cooled by submersion in the pumped liquid
- double mechanical seal with non-toxic oil filling – silicon carbide on the pump side, carbon/ceramic on the motor side
- shaft supported in ball bearings with permanent grease filling for quiet operation
- protection class IP68, insulation class F, handle covered with insulating rubber
- radial discharge with internal thread 2", suitable for lifting device DSD2
The pump can be installed fixedly or portably in a vertical position. The liquid temperature can be 0 to +35 °C for domestic use and up to +50 °C for other uses; when operating with partially submerged motor, the ambient temperature can be up to +40 °C. The electrical connection must be carried out by a qualified person.
Technical parameters
| Code | 60219350H |
| Manufacturer | DAB |
| Type | DAB.FEKA VS 1100 M-A |
| Power supply | 1×230 V, 50 Hz |
| Float switch | yes, automatic operation |
| Max. pumping head | 14 m |
| Max. flow rate | 32 m³/h |
| Passability | solids up to 50 mm |
| Discharge connection | internal thread 2" |
| Material | stainless steel AISI 304 |
| Protection / insulation | IP68 / F |
| Supply cable | 10 m H07RN-F with Schuko plug |
| Liquid temperature | 0 to +50 °C (domestic use up to +35 °C) |
Frequently asked questions
What size of solids can the pump pass?
The vortex impeller can pass solid matter with a diameter up to 50 mm. The pump is designed for non-aggressive waste and sewage water.
Does the pump need a control panel?
No, version M-A has a float switch and built-in thermal motor protection, so it operates automatically according to the water level. It is plugged into a socket protected by a residual current device using a Schuko plug.
Which tank can I install the pump in?
For FEKA VS 1100 in version M-A, the DAB FEKABOX 200 sewage tank is recommended, which is prepared for installation of pumps with a float switch.
Additional parameters
| Category: | DAB.FEKA - submersible sewage pumps |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | 60219350H |
| Manufacturer: | DAB |
| Type: | DAB.FEKA VS 1100 M-A |
| Power supply: | 1×230 V, 50 Hz |
| Float switch: | yes, automatic operation |
| Max. head: | 14 m |
| Max. flow: | 32 m³/h |
| Free passage: | solids up to 50 mm |
| Outlet connection: | 2" female thread |
| Material: | AISI 304 stainless steel |
| Protection / insulation: | IP68 / F |
| Power cable: | 10 m H07RN-F with Schuko plug |
| Liquid temperature: | 0 to +50 °C (domestic up to +35 °C) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!