Submersible sewage pump DAB.FEKA VS 750 M-A, all-stainless steel, 1×230 V with float, particles up to 50 mm – SPECIAL OFFER

Product detailed description

DAB.FEKA VS 750 M-A (code 60219348H) is a submersible sewage pump with a body, motor housing and terminal cover with handle made of stainless steel AISI 304. The precisely cast stainless steel vortex impeller allows passage of solids up to 50 mm in diameter, so the pump can handle non-aggressive waste and sewage water. The maximum delivery head is 9.6 m and the maximum flow rate is 24 m³/h.

Version M-A

The single-phase motor for 1×230 V has a permanently connected starting capacitor and built-in temperature sensors that protect the winding from overheating. A float switch turns the pump on and off automatically depending on the water level. The supply cable H07RN-F with a length of 10 m is terminated with a Schuko plug.

Construction

• dry two-pole asynchronous motor, hermetically sealed and cooled by submersion in the pumped liquid
• double mechanical seal filled with non-toxic oil – silicon carbide on the pump side, carbon/ceramic on the motor side
• shaft supported in ball bearings with permanent grease filling for quiet operation
• protection class IP68, insulation class F, handle covered with insulating rubber
• radial discharge with internal thread 2", suitable for lifting device DSD2

The pump can be installed permanently or portably in a vertical position. The liquid temperature can be from 0 to +35 °C for domestic use and up to +50 °C for other uses; in operation with partially submerged motor, the ambient temperature can be up to +40 °C. The electrical connection must be performed by a qualified person.

Technical parameters

Frequently asked questions

What size of solids can the pump pass?
The vortex impeller allows passage of solids with a diameter up to 50 mm. The pump is designed for non-aggressive waste and sewage water.

Does the pump need a control panel?
No, version M-A has a float switch and built-in thermal motor protection, so it operates automatically depending on the water level. It is switched on by plugging the Schuko plug into a socket protected by a residual current device.

Into which tank can I install the pump?
For FEKA VS 750 in version M-A, the sewage tanks DAB FEKABOX 110 and FEKABOX 200 are suitable, which are prepared for installation of pumps with a float switch.