Submersible sewage pump with cutter DAB.GRINDER FX 15.15 T-NA, 3×400 V, P2 1.6 kW
Code: 60191259Product detailed description
DAB.GRINDER FX 15.15 T-NA (code 60191259) is a submersible sewage pump with a cutting device designed for pumping waste water from sewer systems in residential and commercial buildings. The efficient cutting system made of AISI 630 stainless steel handles waste water containing fibers, paper or textiles and allows connection to a small-diameter discharge pipe. The pump is certified according to standard EN 12050-1.
Electrical data of model 15.15 T-NA
- three-phase motor 3×400 V, 50 Hz, rated speed 2870 rpm, without float
- rated power P2 1.6 kW (2.1 HP), power consumption P1 max. 2.1 kW, rated current 3.8 A
- winding overheating sensors with intervention at +130 °C – their connection is provided by the user
Construction and installation
The pump body, motor body and impeller are made of cast iron, the motor shaft is made of stainless steel. The double mechanical seal SiC-SiC / SiC-C works in an oil chamber out of contact with the pumped liquid and is independent of the direction of rotation. The discharge is connected by thread Rp 1 1/2" or flange DN 32 PN 10/6 or DN 40 PN 6. The pump is mounted permanently with a lifting device or mobile on a base directly on the bottom of the tank. With full submersion, continuous operation S1 is possible, dry operation up to 10 minutes and a maximum of 20 starts per hour are allowed. Protection class IP68, insulation class F, 10 m power cable H07RN8-F, pump weight 38 kg.
Technical parameters
| Code | 60191259 |
| Manufacturer | DAB |
| Type | DAB.GRINDER FX 15.15 T-NA |
| Power supply | 3×400 V, 50 Hz |
| Float | no |
| Rated power P2 | 1.6 kW (2.1 HP) |
| Power consumption P1 max. | 2.1 kW |
| Rated current | 3.8 A |
| Impeller | cutting system made of AISI 630 stainless steel |
| Discharge connection | Rp 1 1/2" / DN 32 / DN 40 |
| Protection / insulation | IP68 / F |
| Liquid temperature | up to +50 °C (short-term +60 °C) |
| Standard | EN 12050-1 |
| Weight | 38 kg |
Frequently asked questions
What is the cutter used for?
The cutting system cuts fibers, paper and textiles in waste water, so the pump can be connected to a small-diameter discharge pipe.
Does the pump operate automatically?
Not by itself – version T-NA is three-phase and has no float. Level-controlled switching and motor protection including connection of overheating sensors must be ensured by a control panel and electrical installation.
How is the pump installed?
Permanently on a lifting device or mobile, when it stands on a base directly on the bottom of the tank. The discharge is connected by thread Rp 1 1/2" or flange DN 32 or DN 40.
Additional parameters
| Category: | DAB.GRINDER FX - sewage pump with grinder |
|---|---|
| Warranty: | 2 years |
| Weight: | 38 kg |
| Availability: | In stock or at supplier |
| Code: | 60191259 |
| Manufacturer: | DAB |
| Type: | DAB.GRINDER FX 15.15 T-NA |
| Power supply: | 3×400 V, 50 Hz |
| Float switch: | no |
| Rated power P2: | 1.6 kW (2.1 HP) |
| Max. power input P1: | 2.1 kW |
| Rated current: | 3.8 A |
| Impeller: | AISI 630 stainless steel cutting system |
| Outlet connection: | Rp 1 1/2" / DN 32 / DN 40 |
| Protection / insulation: | IP68 / F |
| Liquid temperature: | up to +50 °C (briefly +60 °C) |
| Standard: | EN 12050-1 |
| Weight: | 38 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!