Dry-running pump with inverter DAB KLPE 40-1600 0.70 NGD, 1×230 V, flanged
Code: 60217558Product detailed description
The KLPE 40-1600 is a circulating pump for hot or cold water from the DAB.KLPE series. The suction and discharge ports share one axis, so the pump drops directly into the pipe run. Code 60217558 is the version designated 0.70 NGD for a 1×230 V supply.
This code in detail
- Product code: 60217558.
- Model: KLPE 40-1600, DAB.KLPE series.
- Variant designation: 0.70 NGD.
- Supply: 1×230 V.
- Connection: DN 40 flanges, PN 10.
How the series is built
- Energy efficiency class IE5, controllable with the NgDrive inverter; remote monitoring and setup through H2D.
- Cast-iron pump body and motor support, technopolymer impeller.
- Motor shaft of AISI 316 steel and a silicon carbide / silicon carbide mechanical seal.
- PN 10 flanges; a PN 6 counter-flange can be used when replacing a pump in an older installation.
- Built-in thermal and current protection of the motor.
Operating conditions
Clean, thin liquid without solid or abrasive particles, with up to 50 % glycol, from −15 to +120 °C; ambient temperature up to +40 °C, working pressure up to 10 bar. Mount the pump horizontally, or vertically with the motor above the pump. The electrical connection and commissioning should be done by a qualified specialist.
Technical data
| Code | 60217558 |
| Manufacturer | DAB |
| Type | DAB.KLPE |
| Model | KLPE 40-1600 |
| Variant designation | 0.70 NGD |
| Supply | 1×230 V |
| Connection | DN 40 flanges, PN 10 |
| Energy efficiency class | IE5 |
| Pump body | cast iron |
| Impeller | technopolymer |
| Liquid temperature | −15 to +120 °C |
| Max. glycol content | 50 % |
| Max. working pressure | 10 bar |
| Ingress protection | IPX5 |
Frequently asked questions
Which liquids is the KLPE pump meant for?
Clean, thin water without solid or abrasive particles, also with up to 50 % glycol, from −15 to +120 °C.
What supply does code 60217558 need?
This code is the version for 1×230 V. Other voltages in the KLPE series have their own codes.
How is the pump installed?
Directly in the pipework, horizontally or vertically with the motor on top. The flanges are PN 10; a PN 6 counter-flange can be used when replacing a pump in an older installation.
Additional parameters
| Category: | DAB.DKLM,DKLP,KLM,KLP - Dry-Rotor Pumps - Various Systems |
|---|---|
| Warranty: | 2 years |
| Code: | 60217558 |
| Manufacturer: | DAB |
| Type: | DAB.KLPE |
| Model: | KLPE 40-1600 |
| Variant designation: | 0.70 NGD |
| Supply: | 1×230 V |
| Connection: | DN 40 flanges, PN 10 |
| Energy efficiency class: | IE5 |
| Pump body: | cast iron |
| Impeller: | technopolymer |
| Liquid temperature: | −15 to +120 °C |
| Max. glycol content: | 50 % |
| Max. working pressure: | 10 bar |
| Ingress protection: | IPX5 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
