Dry-running pump with inverter DAB KLPE 40-1800 0.75 NGD, 1×230 V, flanged

Code: 60217559
Not rated Rating details
3 593,62 € –20 %
Suchobežné čerpadlo s meničom DAB KLPE 40-1800 0,75 NGD, 1×230 V, prírubové
3 593,62 € –20 % 2 874,90 € / pcs 2 337,32 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The KLPE 40-1800 is a circulating pump for hot or cold water from the DAB.KLPE series. The suction and discharge ports share one axis, so the pump drops directly into the pipe run. Code 60217559 is the version designated 0.75 NGD for a 1×230 V supply.

This code in detail

  • Product code: 60217559.
  • Model: KLPE 40-1800, DAB.KLPE series.
  • Variant designation: 0.75 NGD.
  • Supply: 1×230 V.
  • Connection: DN 40 flanges, PN 10.

How the series is built

  • Energy efficiency class IE5, controllable with the NgDrive inverter; remote monitoring and setup through H2D.
  • Cast-iron pump body and motor support, technopolymer impeller.
  • Motor shaft of AISI 316 steel and a silicon carbide / silicon carbide mechanical seal.
  • PN 10 flanges; a PN 6 counter-flange can be used when replacing a pump in an older installation.
  • Built-in thermal and current protection of the motor.

Operating conditions

Clean, thin liquid without solid or abrasive particles, with up to 50 % glycol, from −15 to +120 °C; ambient temperature up to +40 °C, working pressure up to 10 bar. Mount the pump horizontally, or vertically with the motor above the pump. The electrical connection and commissioning should be done by a qualified specialist.

Technical data

Code60217559
ManufacturerDAB
TypeDAB.KLPE
ModelKLPE 40-1800
Variant designation0.75 NGD
Supply1×230 V
ConnectionDN 40 flanges, PN 10
Energy efficiency classIE5
Pump bodycast iron
Impellertechnopolymer
Liquid temperature−15 to +120 °C
Max. glycol content50 %
Max. working pressure10 bar
Ingress protectionIPX5

Frequently asked questions

Which liquids is the KLPE pump meant for?
Clean, thin water without solid or abrasive particles, also with up to 50 % glycol, from −15 to +120 °C.

What supply does code 60217559 need?
This code is the version for 1×230 V. Other voltages in the KLPE series have their own codes.

How is the pump installed?
Directly in the pipework, horizontally or vertically with the motor on top. The flanges are PN 10; a PN 6 counter-flange can be used when replacing a pump in an older installation.

Additional parameters

Category: DAB.DKLM,DKLP,KLM,KLP - Dry-Rotor Pumps - Various Systems
Warranty: 2 years
Code: 60217559
Manufacturer: DAB
Type: DAB.KLPE
Model: KLPE 40-1800
Variant designation: 0.75 NGD
Supply: 1×230 V
Connection: DN 40 flanges, PN 10
Energy efficiency class: IE5
Pump body: cast iron
Impeller: technopolymer
Liquid temperature: −15 to +120 °C
Max. glycol content: 50 %
Max. working pressure: 10 bar
Ingress protection: IPX5

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.