Dry-rotor in-line pump DAB.CM2 50-530 T, flanged, DN 50

Code: 60215264
Not rated Rating details
902,56 € –20 %
Suchobežné in-line čerpadlo DAB.CM2 50-530 T, prírubové, DN 50
902,56 € –20 % 722,05 € / pcs 587,03 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

DAB.CM2 50-530 T (code 60215264) is a single dry-rotor in-line pump with a flanged DN 50 connection. According to its type key it reaches a maximum head of about 5.3 m (the number 530 gives the head in cm). It is driven by a 4-pole three-phase asynchronous motor.

Applications

  • Water circulation in heating and air-conditioning systems of commercial buildings, including systems with solar collectors
  • Pumping clean, non-aggressive, non-viscous liquids free of solid and abrasive particles, with properties close to water
  • Fixed installation directly in the pipeline, with suction and discharge on the same axis (in-line)

Construction

The pump casing and the adapter joining the motor to the pump are made of cast iron; the impeller is cast iron or technopolymer depending on the type. The shaft is sealed by a standard silicon carbide mechanical seal with EPDM O-rings, and the motor shaft is stainless steel. The motor is an air-cooled 4-pole three-phase asynchronous motor; the flanges are PN 10 or PN 16 with threaded ports for pressure gauges.

Series data

Series data from the manufacturer: operating range up to 105 m³/h with a head of up to 110 m, liquid temperature from −15 to +140 °C, ambient temperature up to +50 °C, maximum operating pressure 16 bar, glycol content up to 50 %, protection class IP 55, insulation class F, supply 3 × 230 V / 3 × 400 V, 50 Hz.

Installation and operation

Install the pump permanently in the pipeline, horizontally or vertically and always with the motor on top; pumps with motors from 7.5 kW upwards only vertically. Overload protection of the motor must be provided by the user, and the electrical connection should be made by a qualified person.

Technical data

Code60215264
ManufacturerDAB
TypeDAB.CM2
Model designation50-530 T
Nominal flange sizeDN 50
Maximum head according to designation≈ 5.3 m
Motorthree-phase asynchronous, 4-pole
Supply3 × 230 V / 3 × 400 V, 50 Hz
FlangesPN 10 / PN 16
Liquid temperature−15 … +140 °C
Maximum pressure16 bar
Protection classIP 55
Insulation classF
Designsingle pump, flanged

Frequently asked questions

What liquid can the pump handle?
Clean, non-aggressive, non-viscous liquids free of solid and abrasive particles, with properties similar to water. The glycol content may be up to 50 %.

In what position is the pump installed?
Permanently in the pipeline, horizontally or vertically, with the motor above the pump. Pumps with motors from 7.5 kW upwards are installed vertically only.

What does the designation DAB.CM2 50-530 T mean?
The DAB.CM2 series consists of single dry-rotor pumps with a 4-pole motor; 50 is the nominal flange size (DN), 530 is the maximum head in cm (about 5.3 m) and T stands for a three-phase motor.

Additional parameters

Category: DAB.CM,CM-G,DCM,DCM-G - Dry-Rotor Pumps, 4-Pole
Warranty: 2 years
Code: 60215264
Manufacturer: DAB
Type: DAB.CM2
Model designation: 50-530 T
Nominal flange size: DN 50
Maximum head according to designation: ≈ 5.3 m
Motor: three-phase asynchronous, 4-pole
Supply: 3 × 230 V / 3 × 400 V, 50 Hz
Flanges: PN 10 / PN 16
Liquid temperature: −15 … +140 °C
Maximum pressure: 16 bar
Protection class: IP 55
Insulation class: F
Design: single pump, flanged

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.