Dry-rotor in-line pump DAB.CP-G 100-1950/A/BAQE/5,5, flanged, DN 100, motor 5.5 kW

Code: 1D6111G9V
Not rated Rating details
3 299,59 € –20 %
Suchobežné in-line čerpadlo DAB.CP-G 100-1950/A/BAQE/5,5, prírubové, DN 100, motor 5,5 kW
3 299,59 € –20 % 2 639,67 € / pcs 2 146,07 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

DAB.CP-G 100-1950/A/BAQE/5,5 (code 1D6111G9V) is a single dry-rotor in-line pump with a flanged DN 100 connection and a motor rated at 5.5 kW. According to its type key it reaches a maximum head of about 19.5 m (the number 1950 gives the head in cm).

Applications

  • Water circulation in heat-exchange substations, boiler rooms, industrial plants and the air conditioning of large buildings
  • Pumping clean, non-aggressive, non-viscous liquids free of solid and abrasive particles, with properties close to water
  • Fixed installation directly in the pipeline, with suction and discharge on the same axis (in-line)

Construction

The in-line pump casing and the adapter joining the motor to the pump are made of cast iron. The connection flanges have plugged threaded holes for measuring and sensing devices. The shaft is sealed by a carbon/ceramic mechanical seal with EPDM O-rings. The motor is an enclosed, air-cooled two-pole three-phase asynchronous motor with a stainless steel shaft running in grease-filled bearings.

Series data

Series data from the manufacturer: operating range from 3.6 to 420 m³/h with a head of up to 102 m, maximum pressure PN 16, ambient temperature up to +40 °C, insulation class F, supply 3 × 400 V, 50 Hz. The maximum liquid temperature is +120 to +140 °C depending on the model.

Installation and operation

Install the pump in the pipeline horizontally or vertically with the motor above the pump. The motor must be protected by an external overload protection device, and the electrical connection should be made by a qualified person.

Technical data

Code1D6111G9V
ManufacturerDAB
TypeDAB.CP-G
Model designation100-1950/A/BAQE/5,5
Nominal flange sizeDN 100
Maximum head according to designation≈ 19.5 m
Motorthree-phase asynchronous, 2-pole
Motor power5.5 kW
Supply3 × 400 V, 50 Hz
FlangesPN 16
Maximum pressure16 bar
Insulation classF
Designsingle pump, flanged

Frequently asked questions

What liquid can the pump handle?
Clean, non-aggressive, non-viscous liquids free of solid and abrasive particles, with properties similar to water.

In what position is the pump installed?
Permanently in the pipeline, horizontally or vertically, with the motor above the pump.

What does the designation DAB.CP-G 100-1950/A/BAQE/5,5 mean?
100 is the nominal flange size (DN), 1950 is the maximum head in cm (about 19.5 m), A and BAQE denote the design of the impeller and the mechanical seal, and the last number 5.5 is the motor power in kW.

Additional parameters

Category: DAB.CP,CP-G,DCP,DCP-G - Dry-Rotor Pumps, 2-Pole
Warranty: 2 years
Code: 1D6111G9V
Manufacturer: DAB
Type: DAB.CP-G
Model designation: 100-1950/A/BAQE/5,5
Nominal flange size: DN 100
Maximum head according to designation: ≈ 19.5 m
Motor: three-phase asynchronous, 2-pole
Motor power: 5.5 kW
Supply: 3 × 400 V, 50 Hz
Flanges: PN 16
Maximum pressure: 16 bar
Insulation class: F
Design: single pump, flanged

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.