Dry-rotor in-line pump DAB.CP-G 65-4700/A/BAQE/11, flanged, DN 65, motor 11 kW
Code: 1D4311GBVProduct detailed description
DAB.CP-G 65-4700/A/BAQE/11 (code 1D4311GBV) is a single dry-rotor in-line pump with a flanged DN 65 connection and a motor rated at 11 kW. According to its type key it reaches a maximum head of about 47 m (the number 4700 gives the head in cm).
Applications
- Water circulation in heat-exchange substations, boiler rooms, industrial plants and the air conditioning of large buildings
- Pumping clean, non-aggressive, non-viscous liquids free of solid and abrasive particles, with properties close to water
- Fixed installation directly in the pipeline, with suction and discharge on the same axis (in-line)
Construction
The in-line pump casing and the adapter joining the motor to the pump are made of cast iron. The connection flanges have plugged threaded holes for measuring and sensing devices. The shaft is sealed by a carbon/ceramic mechanical seal with EPDM O-rings. The motor is an enclosed, air-cooled two-pole three-phase asynchronous motor with a stainless steel shaft running in grease-filled bearings.
Series data
Series data from the manufacturer: operating range from 3.6 to 420 m³/h with a head of up to 102 m, maximum pressure PN 16, ambient temperature up to +40 °C, insulation class F, supply 3 × 400 V, 50 Hz. The maximum liquid temperature is +120 to +140 °C depending on the model.
Installation and operation
Install the pump in the pipeline horizontally or vertically with the motor above the pump. The motor must be protected by an external overload protection device, and the electrical connection should be made by a qualified person.
Technical data
| Code | 1D4311GBV |
| Manufacturer | DAB |
| Type | DAB.CP-G |
| Model designation | 65-4700/A/BAQE/11 |
| Nominal flange size | DN 65 |
| Maximum head according to designation | ≈ 47 m |
| Motor | three-phase asynchronous, 2-pole |
| Motor power | 11 kW |
| Supply | 3 × 400 V, 50 Hz |
| Flanges | PN 16 |
| Maximum pressure | 16 bar |
| Insulation class | F |
| Design | single pump, flanged |
Frequently asked questions
What liquid can the pump handle?
Clean, non-aggressive, non-viscous liquids free of solid and abrasive particles, with properties similar to water.
In what position is the pump installed?
Permanently in the pipeline, horizontally or vertically, with the motor above the pump.
What does the designation DAB.CP-G 65-4700/A/BAQE/11 mean?
65 is the nominal flange size (DN), 4700 is the maximum head in cm (about 47 m), A and BAQE denote the design of the impeller and the mechanical seal, and the last number 11 is the motor power in kW.
Additional parameters
| Category: | DAB.CP,CP-G,DCP,DCP-G - Dry-Rotor Pumps, 2-Pole |
|---|---|
| Warranty: | 2 years |
| Code: | 1D4311GBV |
| Manufacturer: | DAB |
| Type: | DAB.CP-G |
| Model designation: | 65-4700/A/BAQE/11 |
| Nominal flange size: | DN 65 |
| Maximum head according to designation: | ≈ 47 m |
| Motor: | three-phase asynchronous, 2-pole |
| Motor power: | 11 kW |
| Supply: | 3 × 400 V, 50 Hz |
| Flanges: | PN 16 |
| Maximum pressure: | 16 bar |
| Insulation class: | F |
| Design: | single pump, flanged |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
