IVAR.TAKR system insulation roll with ALU PET foil and impact sound insulation – 30 mm, 10 m²
Code: TAKR1DBProduct detailed description
The IVAR.TAKR system roll, code TAKR1DB, forms the thermal insulation layer under wet underfloor heating and also reduces impact sound. It is based on expanded polystyrene EPS 100 covered with a tear-resistant laminated ALU PET foil. The foil reflects heat into the room and carries a printed 50 × 50 mm installation grid, by which the pipes are laid at exact centre spacings in multiples of 50 mm.
Properties
- roll format 10 000 × 1 000 mm, usable area 10 m²
- total thickness 30 mm, thermal resistance R 0.79 m²K/W, thermal conductivity λD 0.038 W/mK
- impact sound reduction 27 dB, dynamic stiffness up to 30 MN/m³
- maximum load 10 kN/m² (1000 kg/m²), bending strength min. 50 kPa
- temperature resistance 95 °C short-term, 75 to 80 °C long-term
- reaction to fire class E, classification EPS-100 according to EN 13163
One side of the foil has a self-adhesive strip that joins neighbouring rolls quickly and accurately – the joint prevents concrete screed and mixing water from seeping through. A version without impact sound insulation and with a higher permitted load of 20 kN/m² is the TAKR1 roll.
Technical data
| Code | TAKR1DB |
| Manufacturer | IVAR |
| Type | IVAR.TAKR |
| Material | EPS 100 with laminated ALU PET foil |
| Roll size | 10 000 × 1 000 mm |
| Usable area | 10 m² |
| Total thickness | 30 mm |
| Thermal resistance R | 0.79 m²K/W |
| Thermal conductivity λD | 0.038 W/mK |
| Impact sound reduction | 27 dB |
| Max. load | 10 kN/m² |
| Installation grid | 50 × 50 mm |
| Reaction to fire | class E |
Frequently asked questions
What is the difference between the TAKR1DB and TAKR1 rolls?
TAKR1DB has an insulation layer with 27 dB impact sound reduction and a maximum load of 10 kN/m². TAKR1 has no impact sound insulation and withstands 20 kN/m².
How much area does one roll cover?
A roll measuring 10 000 × 1 000 mm covers 10 m² of floor. The total insulation thickness is 30 mm.
How are the rolls joined together?
One side of the ALU PET foil has a self-adhesive strip that is taped over the joint with the neighbouring roll. The joint prevents concrete screed and mixing water from seeping under the insulation.
What guides the laying of the heating pipes?
The foil has a printed 50 × 50 mm grid. The pipes are laid along it at centre spacings in multiples of 50 mm.
Additional parameters
| Category: | system insulation boards |
|---|---|
| Warranty: | 2 years |
| Code: | TAKR1DB |
| Manufacturer: | IVAR |
| Type: | IVAR.TAKR |
| Material: | EPS 100 with laminated ALU PET foil |
| Roll size: | 10 000 × 1 000 mm |
| Usable area: | 10 m² |
| Total thickness: | 30 mm |
| Thermal resistance R: | 0.79 m²K/W |
| Thermal conductivity λD: | 0.038 W/mK |
| Impact sound reduction: | 27 dB |
| Max. load: | 10 kN/m² |
| Installation grid: | 50 × 50 mm |
| Reaction to fire: | class E |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
