Tee 90° with female thread IVAR.IVN442 – stainless steel AISI 304, 54-Rp2"-54 mm
Code: IVN442.542054Product detailed description
Tee 90° with female thread IVAR.IVN442 is a press fitting made of AISI 304 stainless steel for 54 mm pipe. Connection: 2 press ends 54 mm, female thread Rp2" on the branch.
Where it is used
Use: closed heating and cooling circuits, solar systems, compressed air and vacuum systems, inert and technical gases, technical liquids, industrial applications, waste water and rainwater. The AISI 304 stainless steel system is not suitable for drinking water.
Dimensions and connection
- Pipe diameter: 54 mm
- 2 press ends 54 mm, female thread Rp2" on the branch
- Dimension L: 142 mm
- Dimension L1: 71 mm
- Dimension Z: 34 mm
- Dimension Z1: 49 mm
Installation
For 54 mm pipe, chain-type press jaws with the M profile and at least 3 segments are used. Cut the pipe square, deburr it inside and out, push it in up to the stop and mark the insertion depth. Wet the O-ring with water only, never with oil or grease, and press each joint just once. Have the installation done by a qualified contractor and follow the IVAR.PRESS system manual.
Technical data
| Code | IVN442.542054 |
| Manufacturer | IVAR |
| Type | IVAR.IVN442 |
| Product kind | Tee 90° with female thread |
| Pipe diameter | 54 mm |
| Thread | Rp2" |
| Dimension L | 142 mm |
| Dimension L1 | 71 mm |
| Dimension Z | 34 mm |
| Dimension Z1 | 49 mm |
| Material | stainless steel AISI 304 (1.4301) |
| Seal | O-ring EPDM |
| Max. pressure | PN 16 |
| Temperature | -20 to +120 °C |
| Press jaws | M profile, chain type (min. 3 segments) |
Frequently asked questions
What are the dimensions and connection of IVN442.542054?
Connection: 2 press ends 54 mm, female thread Rp2" on the branch. Dimensions according to the manufacturer's data sheet: L = 142 mm, L1 = 71 mm, Z = 34 mm, Z1 = 49 mm.
Can IVN442.542054 be used for drinking water?
No. The AISI 304 stainless steel system is intended for heating, cooling and technical lines, not for drinking water.
Which press jaws are used for IVN442.542054?
For 54 mm pipe, chain-type press jaws with the M profile and at least 3 segments are used.
Additional parameters
| Category: | IVAR.IVN42 - T-pieces 90° with internal thread |
|---|---|
| Warranty: | 2 years |
| Code: | IVN442.542054 |
| Manufacturer: | IVAR |
| Type: | IVAR.IVN442 |
| Product kind: | Tee 90° with female thread |
| Pipe diameter: | 54 mm |
| Thread: | Rp2" |
| Dimension L: | 142 mm |
| Dimension L1: | 71 mm |
| Dimension Z: | 34 mm |
| Dimension Z1: | 49 mm |
| Material: | stainless steel AISI 304 (1.4301) |
| Seal: | O-ring EPDM |
| Max. pressure: | PN 16 |
| Temperature: | -20 to +120 °C |
| Press jaws: | M profile, chain type (min. 3 segments) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
