Press tee PRESS-PPSU IVAR.T PPSU 20x20x20 for ALPEX, TURATEC and PEX pipes
Code: 82820300Product detailed description
The IVAR.T PPSU 20x20x20 tee (code 82820300) forms a branch with the same 20 mm diameter on all three outlets – i.e. for 20x2 pipes. It belongs to the IVAR.PRESS press system and connects ALPEX and TURATEC multilayer pipes as well as PEX pipes.
Features
- polyphenylsulfone (PPSU) body, resistant to corrosion and deposits
- AISI 304 stainless steel press sleeve, EPDM O-ring, polycarbonate positioning ring
- max. operating pressure PN 10, temperature range +3 to +95 °C
- hygiene certificate for drinking water
- radial pressing with jaws of profile B or F (according to the manual also TH)
Use and installation
The tee is suitable for underfloor heating, radiator connections and sanitary installations and may remain embedded in floors, shafts or under plaster. The joint is made without an open flame and can be pressurised immediately after pressing. If a joint is accidentally left unpressed, it leaks during the pressure test between 1 and 6.5 bar, so the mistake shows up before the pipework is covered. Before inserting, cut the pipe square, calibrate and deburr it; water makes insertion easier – do not use oil or other lubricants.
Technical data
| Code | 82820300 |
| Manufacturer | IVAR |
| Type | IVAR.T PPSU |
| Product type | equal press tee |
| Size | 20x20x20 |
| Suitable pipes | ALPEX, TURATEC, PEX 20x2 |
| Max. operating pressure | PN 10 |
| Temperature range | +3 to +95 °C |
| Press jaws | B, F (also TH) |
| Pressing principle | radial |
| Material | PPSU, AISI 304 sleeve, EPDM O-ring, PC ring |
| Drinking water | hygiene certificate |
Frequently asked questions
Which pipes is the 20x20x20 tee designed for?
For ALPEX and TURATEC multilayer pipes and PEX pipes with a 20 mm diameter (20x2) on all three outlets. For a branch of a different diameter, a reducing tee is used.
How can I recognise an unpressed joint?
PPSU fittings in sizes 16 to 32 mm are designed so that an unpressed joint leaks during the pressure test between 1 and 6.5 bar. Check the correct pipe position in the windows of the positioning ring before pressing.
Can the tee be embedded in the floor or under plaster?
Yes, IVAR.PRESS PPSU press joints may be used as inaccessible joints in floors, shafts and under plaster. They can be pressurised immediately after pressing.
Is the tee suitable for drinking water?
Yes, it has a hygiene certificate for drinking water and is also used in heating installations up to 10 bar and +95 °C.
Additional parameters
| Category: | T-pieces press - PPSU |
|---|---|
| Warranty: | 2 years |
| Code: | 82820300 |
| Manufacturer: | IVAR |
| Type: | IVAR.T PPSU |
| Product type: | equal press tee |
| Size: | 20x20x20 |
| Suitable pipes: | ALPEX, TURATEC, PEX 20x2 |
| Max. operating pressure: | PN 10 |
| Temperature range: | +3 to +95 °C |
| Press jaws: | B, F (also TH) |
| Pressing principle: | radial |
| Material: | PPSU, AISI 304 sleeve, EPDM O-ring, PC ring |
| Drinking water: | hygiene certificate |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
