IVAR.T PPSU3 IC press tee 20/2 × 20/2 × 20/2 made of PPSU

Code: PPSU3RV
Not rated Rating details
9,89 € –20 %
T-kus PRESS - 20/2x20/2x20/2
9,89 € –20 % 7,91 € / pcs 6,43 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

IVAR.T PPSU3 IC (PPSU3RV) is an equal branch for three pipes of 20 × 2 mm. It joins the main run of polyethylene PE-X pipe and is used when installing IVARCLIMA radiant ceiling and wall heating or cooling.

Why this fitting

  • made of PPSU (polyphenylsulfone), a plastic that copes well with hot water
  • puts up minimal hydraulic resistance to the medium flowing through
  • no sealing elements or washers are needed
  • the system carries the AENOR 001/007235 certificate

Installation and operation

  • pressed axially; the data sheet lists the sleeve IVAR.O PPSU7 IC for 20 × 2 mm pipe, the pressing tool IVAR.A-PRESS and the thermal insulation IVAR.ISOL-PPSU
  • maximum working pressure PN 6, maximum temperature +95 °C

Before commissioning, the manufacturer recommends flushing the system and treating it with the product IVAR.ADD-IB.

Technical data

CodePPSU3RV
ManufacturerIVAR
TypeIVAR.T PPSU3 IC
Fitting typeequal press tee
Size20/2 × 20/2 × 20/2
PipePE-X 20 × 2 mm
MaterialPPSU (polyphenylsulfone)
Max. working pressurePN 6
Max. working temperature+95 °C
Pressingaxial, sleeve IVAR.O PPSU7 IC
SystemIVARCLIMA – radiant heating and cooling
CertificateAENOR 001/007235

Frequently asked questions

What pipe is the tee intended for?
PE-X pipe of 20 × 2 mm – all three branches have this size.

What else is needed for pressing besides the fitting?
The data sheet lists the sleeve IVAR.O PPSU7 IC for 20 × 2 mm pipe and the IVAR.A-PRESS tool for axial pressing as installation accessories.

Do seals have to be used during installation?
No, the fitting needs no additional sealing elements or washers.

Additional parameters

Category: PRESS Fittings and Valves
Code: PPSU3RV
Manufacturer: IVAR
Type: IVAR.T PPSU3 IC
Fitting type: equal press tee
Size: 20/2 × 20/2 × 20/2
Pipe: PE-X 20 × 2 mm
Material: PPSU (polyphenylsulfone)
Max. working pressure: PN 6
Max. working temperature: +95 °C
Pressing: axial, sleeve IVAR.O PPSU7 IC
System: IVARCLIMA – radiant heating and cooling
Certificate: AENOR 001/007235

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.