IVAR.TEC changeover float switch – 3 m cable – SALE
Code: SI0069Related products
Product detailed description
The IVAR.TEC float (SI0069) is a mechanical level switch with a changeover contact and a 3 m cable. It can switch submersible pumps automatically or act as a dry-run safeguard.
Wiring by purpose
- Emptying: black and brown wires – the pump starts when the float rises to its upper position and stops in the lower one; insulate the blue wire carefully.
- Filling: black and blue wires – the pump starts in the lower position and stops in the upper one; here the brown wire must be insulated.
Load and environment
- switching current up to 8 A at 250 V with an inductive load (motor coils), up to 20 A at 250 V without an inductive load
- ambient temperature up to 60 °C
- immersion depth up to 10 m
Electrical connection should be made by a qualified person.
Technical data
| Code | SI0069 |
| Manufacturer | IVAR |
| Type | IVAR.TEC |
| Product type | changeover float switch |
| Cable length | 3 m |
| Wiring modes | emptying / filling |
| Max. switching current – inductive load | 8 A at 250 V |
| Max. switching current – non-inductive load | 20 A at 250 V |
| Max. ambient temperature | 60 °C |
| Max. immersion depth | 10 m |
Frequently asked questions
How do I wire the float for emptying and for filling?
For emptying, use the black and brown wires and insulate the blue one. For filling, use the black and blue wires and insulate the brown one.
What load can the float switch handle?
It switches up to 8 A at 250 V with an inductive load such as motor coils, and up to 20 A at 250 V without an inductive load.
How long is the cable and how deep can the float be immersed?
This code has a 3 m cable. The float can be immersed to a maximum of 10 m and the ambient temperature must not exceed 60 °C.
Additional parameters
| Category: | DAB. Float switches |
|---|---|
| Warranty: | 24 |
| Code: | SI0069 |
| Manufacturer: | IVAR |
| Type: | IVAR.TEC |
| Product type: | changeover float switch |
| Cable length: | 3 m |
| Wiring modes: | emptying / filling |
| Max. switching current – inductive load: | 8 A at 250 V |
| Max. switching current – non-inductive load: | 20 A at 250 V |
| Max. ambient temperature: | 60 °C |
| Max. immersion depth: | 10 m |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
