Thermoelectric actuator ENGO E30NC-230

Product detailed description

The thermoelectric actuator ENGO E30NC-230 is designed for floor heating systems. It operates at a voltage of 230 V, is attached to the manifold with an M30x1.5 thread, and is closed without current.

You can install it on thermostatic valves in the manifold or on zone valves. Depending on the need, it releases or stops the heating medium in individual circuits (loops), thus allowing the room temperature to be adjusted. It can be controlled directly by a thermostat or by a central terminal block.

Features:

• actuator designed for floor heating
• closed without current (NC)
• can be used with thermostatic valves in the manifold or with zone valves
• controls the flow of heating medium in the circuit
• can be operated directly by a thermostat or via a central terminal block

Technical parameters:

• thread: M30 x 1.5 mm
• power supply: 230 V AC 50 Hz
• power consumption: 2 W
• switching current: 300 mA / 200 ms
• force: 100N +/- 20%
• maximum lift: 4.5 mm
• storage temperature: -25°C to +60°C
• ambient temperature up to +60°C
• protection class: IP 54/II
• cable length: 90 cm
• dimensions [mm]: 41 x 65