Threaded ball check valve series 07 IVAR BRA.T7.100 5/4″ (T7100032)
Code: T7100032Related products
Product detailed description
Valve T7100032 from the BRA.T7.100 series has a ductile iron body and top cover and a ball made of NBR-coated steel. It is full-bore, with low pressure loss and a self-cleaning action, so the manufacturer recommends it for waste water, industrial and agricultural use and for thick, viscous liquids.
Technical data
- Size: 5/4″
- Face-to-face length: 135 mm
- Max. pressure: 16 bar
- Medium temperature: −10 °C … +70 °C
- Body and cover material: ductile iron
- Ball: steel coated with NBR
- Thread: ISO 228-1 (F × F)
- Surface finish: epoxy coating RAL 5002
- Drinking water: yes, approved for drinking water
The removable top cover allows the ball to be cleaned or replaced without taking the valve out of the pipe. Vertical installation is recommended; horizontal is also possible. The valve is not intended for steam or gases. Installation should be left to a qualified company.
Technical data
| Code | T7100032 |
| Manufacturer | IVAR |
| Type | BRA.T7.100 |
| Size | 5/4″ |
| Face-to-face length | 135 mm |
| Max. pressure | 16 bar |
| Medium temperature | −10 °C … +70 °C |
| Body and cover material | ductile iron |
| Ball | steel coated with NBR |
| Thread | ISO 228-1 (F × F) |
| Surface finish | epoxy coating RAL 5002 |
| Drinking water | yes, approved for drinking water |
Frequently asked questions
Can valve T7100032 be installed horizontally?
Yes, the manufacturer permits horizontal and vertical installation and recommends vertical.
Can the valve be cleaned without removing it from the pipe?
Yes, the removable top cover allows the ball to be cleaned and replaced without taking the valve out of the line.
Is the valve suitable for gases?
No, it is not intended for steam or gases. It is meant for liquids such as waste water and for water from −10 to +70 °C.
Additional parameters
| Category: | BRA.T7.100 - threaded check valves (ball) |
|---|---|
| Warranty: | 24 |
| Code: | T7100032 |
| Manufacturer: | IVAR |
| Type: | BRA.T7.100 |
| Size: | 5/4″ |
| Face-to-face length: | 135 mm |
| Max. pressure: | 16 bar |
| Medium temperature: | −10 °C … +70 °C |
| Body and cover material: | ductile iron |
| Ball: | steel coated with NBR |
| Thread: | ISO 228-1 (F × F) |
| Surface finish: | epoxy coating RAL 5002 |
| Drinking water: | yes, approved for drinking water |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
