TYTAN PEX Compression T-joint, internal thread 20x3/4"Fx20, "U" and "TH" jaws

Product detailed description

The TYTAN PEX T-piece with internal thread is used for branching the distribution from PEX/AL/PEX pipes. Two straight ends are crimped onto the pipe, the third branch is terminated with an internal 3/4" thread. The designation 20x3/4"Fx20 expresses the entire arrangement: pipe size 20, branch with internal 3/4" thread (the letter F) and again a pipe size 20. The fitting is made from nickel-plated brass.

Main Features

• material: nickel-plated brass
• internal 3/4" thread on the branch
• crimping with "U" and "TH" dies
• 10-year warranty

Technical Data

Application

The T-piece is used wherever a branch is created from the main line to a component with an external 3/4" thread. Both straight branches have the same size 20, so the fitting connects to pipes of the same diameter.

Installation

Before crimping, check that the pipe is cut straight and clean and that you have "U" or "TH" profile dies available. The connection is created by crimping, so follow the manufacturer's instructions for the crimping tool. Seal the threaded outlet with suitable sealing material and tighten with appropriate force to avoid damaging the thread in the brass body.

Other Dimensions in This Group

The manufacturer also lists the following T-pieces from the same group:

Frequently Asked Questions

Which dies are needed for crimping this T-piece?

The manufacturer specifies "U" and "TH" dies.

What thread does the branch have?

The branch has an internal 3/4" thread. The letter F in the designation 20x3/4"Fx20 means an internal thread, the letter M is used for an external thread, for example in the T-piece 20x1/2"Mx20 from the same group.

What warranty is provided for the fitting?

A 10-year warranty is stated.