TYTAN PEX Compression T-piece, external thread 20x1/2"Mx20, jaws "U" and "TH"

Product detailed description

The TYTAN PEX 20x1/2"Mx20 T-piece divides the supply from a PEX/AL/PEX pipe of size 20 and has an external thread of 1/2" on the branch. The letter M in the designation indicates that the thread is external, so it is screwed into an element with an internal thread. The two straight ends are crimped onto the pipe, and the fitting itself is made of nickel-plated brass.

Main Features

• nickel-plated brass
• external thread 1/2" on the branch
• size 20 on both straight branches
• crimping with "U" and "TH" dies
• collective packaging 10/80 pcs
• 10-year warranty

Technical Data

Application

This type of T-piece is suitable when the branch is to connect directly into an internal thread of another component, without the need for further reduction or insertion. If you need a different size, the manufacturer also offers fittings with codes PEX-TYT-Z.T.GW16X1/2, PEX-TYT-Z.T.GW20X1/2 and PEX-TYT-Z.T.GW26X3/4 in the same group.

Installation

Before crimping, cut the pipe straight, clean its end and prepare the "U" or "TH" profile dies. The connection is made by crimping according to the instructions for the crimping tool used. Seal the external thread of the branch with suitable sealing material and do not use excessive force when tightening to avoid damaging the brass thread.

Frequently Asked Questions

What thread does the branch of this T-piece have?

An external thread of 1/2", which is indicated by the letter M in the designation 20x1/2"Mx20.

What material is the fitting made of?

It is made of nickel-plated brass.

What is the collective packaging and warranty?

In the manufacturer's table, for code PEX-TYT-Z.T.GZ20X1/2, the collective packaging is 10/80 pcs and the product has a 10-year warranty.