TYTAN PEX 90° crimp elbow, with external thread, 26 x 1"

Product detailed description

TYTAN PEX elbow 26 x 1" is a compression fitting with a 90° angle and a 1 inch external thread, intended for PEX/AL/PEX pipes with a size of 26. It allows to change the direction of the pipe and at the same time to terminate it with a threaded connection. It is made of nickel-plated brass and comes with a 10-year warranty.

Main Features

• 90° elbow with a compression end for pipe size 26
• external thread 1" – larger than in the 26 x 3/4" variant
• size 26 x 1": pipe 26, thread 1 inch
• material: nickel-plated brass
• 10-year warranty

Technical Data

Application and Installation

The elbow is intended for the end of a PEX/AL/PEX pipe system with a size of 26, which is connected to an internal thread after a 90° bend. Cut the pipe perpendicularly and remove any burrs before compression. Insert the pipe into the fitting until it reaches the stop and compress it using the appropriate tool for this system. With the larger 1" thread, ensure sufficient sealing, but do not overtighten the joint.

Other Sizes in the Range

In the range of elbows with an external thread, you will also find sizes 16 x 1/2", 20 x 1/2", 20 x 3/4", and 26 x 3/4". The 26 x 3/4" and 26 x 1" variants have the same pipe size and differ only in the thread size.

Frequently Asked Questions

What thread does the 26 x 1" elbow have?

An external thread of 1 inch.

How does it differ from the 26 x 3/4" elbow?

The pipe is the same (26), but this elbow has a larger thread – 1" instead of 3/4".