TYTAN PEX 90° compression elbow, with internal thread, 26 x 3/4"

Product detailed description

The TYTAN PEX 26 x 3/4" elbow is a crimped fitting for PEX/AL/PEX pipes and changes the direction of the pipe by 90°. Its second end features an internal thread of 3/4", to which a component with an external thread is connected. Compared to the 20 x 3/4" variant, the difference lies in the pipe size (26 instead of 20), while the thread remains the same. It is made of nickel-plated brass and comes with a 10-year warranty.

Main Features

• 90° elbow with a crimped connection on the pipe side
• internal thread 3/4"
• size 26 x 3/4": pipe 26, thread 3/4"
• material: nickel-plated brass
• 10-year warranty
• bulk packaging 10/80 pcs

Technical Data

Application and Installation

The elbow is used in PEX/AL/PEX pipe systems of size 26 where the pipe needs to turn at a right angle and end with a threaded component. Cut the pipe perpendicularly before crimping and remove any burrs, then insert it into the fitting and crimp it using the appropriate tool for this type of fitting. When connecting the threaded side, ensure proper sealing of the thread and tighten the connection carefully.

Other Sizes in the Range

In the same range with an internal thread, the sizes 16 x 1/2", 20 x 1/2", and 20 x 3/4" are also available. When ordering, compare the pipe and thread size with the existing piping.

Frequently Asked Questions

What is the difference between the 26 x 3/4" and 20 x 3/4" elbows?

The difference is in the pipe size: this elbow is designed for a pipe of size 26, while the other is for a pipe of size 20. The thread is 3/4 inch in both cases.

Is the thread external or internal?

It is internal, so a component with an external thread is screwed onto it.