TYTAN PEX elbow 90°, compression, with external thread, 20 x 3/4"

Product detailed description

Elbow 20 x 3/4" from the TYTAN PEX system is a compression fitting for PEX/AL/PEX pipes with a 90° angle and external thread. Compared to the 20 x 1/2" variant, it has the same pipe dimension but a larger thread – 3/4". The brass body is nickel-plated and the product is covered by a 10-year warranty.

Main Features

• 90° elbow for changing the direction of the pipe run
• external 3/4" thread for connection to an internal thread
• dimension 20 x 3/4": pipe 20, thread 3/4"
• material: nickel-plated brass
• 10-year warranty
• bulk packaging 10/80 pcs

Technical Data

Application and Installation

The elbow is mounted at the end of a PEX/AL/PEX pipe run of size 20, which after turning 90° transitions into a threaded connection. Cut the pipe perpendicularly, remove burrs and insert it into the fitting until it reaches the stop; then proceed with compression using the appropriate tool for this system. When tightening the external thread, use an appropriate sealing compound and do not overtighten the connection.

Other dimensions in the range

In the range of elbows with external thread, you will also find dimensions 16 x 1/2", 20 x 1/2" and 26 x 3/4". If you need the same pipe size as this item, but a smaller thread, choose the 20 x 1/2" variant.

Frequently Asked Questions

What thread does the 20 x 3/4" elbow have?

An external thread of 3/4 inch.

What is the warranty and material?

The fitting is made of nickel-plated brass and is covered by a 10-year warranty.