Energy-saving circulation pump WITA go.future 2, type 60-25-180

Code: 16033
Not rated Rating details
92,55 € / pcs 75,24 € excl. VAT Measure price:
International delivery
In stock now (2 pcs)

Detailed information

Product detailed description

The circulation pump WITA go.future 2 with designation 60-25-180 belongs to a series whose goal is to reduce electricity consumption for water circulation in the system. The manufacturer notes that a standard circulation pump typically consumes 10 to 20 % of the total electricity consumption in an average household. The go.future 2 series has an energy efficiency index ≤ 0.20, which means up to 80 % energy savings compared to a conventional circulation pump, while maintaining almost the same hydraulic performance.

The pump uses proportional pressure technology, so the supplied power follows the actual demand of the circuit and does not run unnecessarily at full capacity.

What the model offers

  • five-year warranty
  • night mode
  • anti-blocking function
  • display of current energy consumption (in the version with display)
  • the series is also available with a PWM module

What does the designation 60-25-180 mean

The designation indicates a maximum head of 6.0 m (number 60), connection size DN 25 (number 25), and mounting length of 180 mm (number 180). At this length, the pump body is made of grey cast iron with cathodic protection. When replacing an old pump, compare the mounting length and connection with the original unit. This model differs from other types in the series mainly by these two parameters.

Technical data

Max. pump head6.0 m
Max. flow rate3 600 l/h
Energy consumption3 – 42 W
Supply voltage1 x 230 V, 50 Hz
Motor protectionexternal motor protection is not required
Protection class IPIP 42
Ambient temperature0 °C to +40 °C
Medium temperature+5 °C to +110 °C
System pressuremax. 1.0 MPa
Connection sizes in the seriesDN 15, DN 20, DN 25, DN 32
Mounting lengths in the series110 mm, 130 mm, 180 mm
Body materialfor 130 mm and 180 mm mounting lengths – grey cast iron with cathodic protection, for 110 mm mounting length – brass
EEI≤ 0.204
Characteristicsconstant, 4 proportional and 4 proportional power
Product code16033

Application

The pump is suitable for circuits where the medium temperature ranges from +5 °C to +110 °C and the system pressure does not exceed 1.0 MPa. The ambient temperature around the pump should not be lower than 0 °C or higher than +40 °C. External motor protection is not required.

Frequently asked questions

Is external motor protection required for the pump?

No, external motor protection is not required.

What protection class does the pump have?

The protection class is IP 42.

Up to what medium temperature does the pump operate?

The medium temperature can range from +5 °C to +110 °C.

Additional parameters

Category: Other circulation pump brands
Availability: In stock or at supplier

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.