Victron Energy BlueSolar MPPT 150/45 solar charge controller 12/24/48 V
Code: OST_200218Product detailed description
Fast MPPT controller for 12/24/48 V batteries
The BlueSolar MPPT 150/45 is a solar charge controller from Victron Energy. It detects the battery voltage of 12, 24 or 48 V automatically and charges with up to 45 A. It is suitable for both lead-acid and LiFePO4 batteries.
Ultra-fast MPPT tracking delivers, especially under changing cloud cover, up to 30 % higher solar yield than a conventional PWM controller and about 10 % more than slower MPPT controllers. With partial shading of the panels, several maximum power points may occur – the controller finds the truly optimal one, not just a local one.
Efficiency reaches up to 98 % and cooling is passive, without a fan, so the controller runs silently. The manufacturer Victron Energy provides a 5-year warranty.
Charging, indication and settings
- Adaptive three-stage charging – Bulk, Absorption and Float; the absorption time is determined by the battery voltage in the morning before a new cycle, which supports full charging and battery life.
- Rotary switch – choice of eight preset absorption and float voltage values.
- Temperature compensation – an internal temperature sensor adjusts the charging voltage.
- LED indication – blue Bulk, yellow Absorption, green Float.
- Detailed configuration – from a computer via a VE.Direct–USB cable or with the Victron MPPT Control display.
Connection and protection
You can connect a PV array of up to 650 Wp at 12 V, 1300 Wp at 24 V and 2600 Wp at 48 V. If more panels are installed, the controller automatically limits the incoming power to the permissible value. It starts charging when the panel voltage exceeds the battery voltage by 5 V and continues as long as the difference is at least 1 V.
The controller is designed for vertical mounting. During installation always connect the battery first and only then the PV panels; proceed in reverse order when removing it. The terminals are rated for conductors up to 35 mm². The electronics protect against overheating, short circuit and reverse polarity of the PV panels; on the panel side we recommend adding a CITEL surge protector.
Frequently asked questions
What is the highest voltage the panels may have?
The open-circuit voltage of the PV array may reach at most 150 V – this is the absolute maximum at low temperatures. For normal operation we recommend a maximum of 145 V.
Can loads be connected to the controller?
No, this model has no output for DC loads – it only charges the battery.
Can I use panel optimisers?
No. Victron Energy MPPT controllers must not be combined with PV panel optimisers – both devices could be damaged.
Which panels should I choose for a 12 V battery?
We recommend mono- or polycrystalline panels with at least 32 cells; the highest efficiency is achieved with 72 cells (two 12 V panels in series or one 24 V panel). A maximum of 108 cells can be connected, i.e. three 12 V panels in series. With a 24 V battery the minimum is 72 cells.
Technical parameters
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | SCC115045222 |
| EAN | 8719076053033 |
| Battery voltage | 12 / 24 / 48 V (automatic) |
| Max. charge current | 45 A |
| Max. PV array power | 650 W (12 V) / 1300 W (24 V) / 2600 W (48 V) |
| Max. PV open-circuit voltage | 150 V (145 V recommended) |
| Max. efficiency | 98 % |
| Self-consumption | < 35 mA (12 V) / 20 mA (48 V) |
| Absorption voltage | 14.4 / 28.8 / 57.6 V |
| Float voltage | 13.8 / 27.6 / 55.2 V |
| Temperature compensation | −16 mV/°C (12 V) / −32 mV/°C (24 V) / −64 mV/°C (48 V) |
| Operating temperature | −30 to +60 °C (full output up to 40 °C) |
| Protection rating | IP43 electronics / IP22 connection area |
| Terminals | 35 mm² |
| Dimensions (H × L × D) | 185 × 250 × 95 mm |
| Weight | 3 kg |
| Warranty | 5 years |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 3 kg |
| EAN: | 8719076053033 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | SCC115045222 |
| EAN: | 8719076053033 |
| Battery voltage: | 12 / 24 / 48 V (automatic) |
| Max. charge current: | 45 A |
| Max. PV array power: | 650 W (12 V) / 1300 W (24 V) / 2600 W (48 V) |
| Max. PV open-circuit voltage: | 150 V (145 V recommended) |
| Max. efficiency: | 98 % |
| Self-consumption: | < 35 mA (12 V) / 20 mA (48 V) |
| Absorption voltage: | 14.4 / 28.8 / 57.6 V |
| Float voltage: | 13.8 / 27.6 / 55.2 V |
| Temperature compensation: | −16 mV/°C (12 V) / −32 mV/°C (24 V) / −64 mV/°C (48 V) |
| Operating temperature: | −30 to +60 °C (full output up to 40 °C) |
| Protection rating: | IP43 electronics / IP22 connection area |
| Terminals: | 35 mm² |
| Dimensions (H × L × D): | 185 × 250 × 95 mm |
| Weight: | 3 kg |
| Warranty: | 5 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
